| Topic |
 | Material: Repairing Inflatable Kayak *LINK*
By: Michael German | 12/16/2008, 12:45 am |
| Material: Building your own thigh braces
By: Pete Zahirsky | 12/15/2008, 3:42 pm |
| Material: Does the wood matter?
By: Darren | 12/15/2008, 6:36 am |
| Off Topic: Paddling season over!
By: Robert N Pruden | 12/15/2008, 1:46 am |
| Skin-on-Frame: Deck Lines and Bungies
By: danper | 12/14/2008, 7:30 pm |
| Strip: under deck cord attachment
By: Clayton Plunkett | 12/14/2008, 2:39 pm |
| Off Topic: Great resource for windproof fleece custom clothes
By: Bob Deutsch------WebKitFormBoundaryMj+41hHLCDocqqN | 12/12/2008, 8:59 am |
| Skin-on-Frame: Small SOF Kayak for Backwater Canals *LINK*
By: MS | 12/13/2008, 6:35 am |
| Skin-on-Frame: Frame is finished *Pic*
By: Kudzu | 12/12/2008, 7:32 am |
| Other: testing, please ignore
By: MacMcCaskie | 12/11/2008, 8:37 pm |
| Launching: North Star
By: Pat Pierce | 12/11/2008, 3:13 pm |
| S&G: Bulkhead for foot brace: how strong? CLC Shearwatr
By: wwfloyd | 12/11/2008, 2:54 pm |
| Other: Rudder controls on a triple *LINK*
By: Jim Looker | 12/11/2008, 11:12 am |
| Off Topic: As usual, off topic and funny
By: Robert N Pruden | 12/10/2008, 6:02 pm |
| Strip: Wanting ideas for a kayak
By: Doug Morrison | 12/9/2008, 3:05 pm |
| Seeking: foot braces
By: Roger | 12/8/2008, 9:40 pm |
| Seeking: Software to modify/design kayaks
By: Darren | 12/8/2008, 9:03 pm |
| S&G: Fiberglass the Inside Hull or Not? *LINK*
By: John Caldeira | 12/8/2008, 5:22 pm |
| Skin-on-Frame: How long should ribs be
By: Peter B | 12/8/2008, 2:46 pm |
| Epoxy: Rice paper without fiberglass
By: miker | 12/8/2008, 1:18 pm |
| ADMIN! Web Host Upgrade
By: Nick Schade - Guillemot Kayaks | 12/7/2008, 11:28 am |
| Other: Intriguing shape of fast hull *LINK*
By: Jerzy_Szwob | 12/6/2008, 7:54 pm |
| Other: So Cal Kayak Builder's Day Photos *LINK* *Pic*
By: Duane Strosaker | 12/6/2008, 7:45 pm |
| Strip: Porter Cable Upholstery Stapler *Pic*
By: Chris Sperry | 12/6/2008, 12:31 pm |
| Material: Good source for cedar on Vancouver Island?
By: John McGillivray | 12/6/2008, 2:47 am |
| Strip: filling staple holes and other areas
By: john sullivan | 12/5/2008, 11:30 pm |
| Skin-on-Frame: Coaming help needed
By: Kudzu | 12/5/2008, 7:15 pm |
| Shop: Shop Vac/Dust collector
By: Roger Turgeon | 12/4/2008, 10:14 pm |
| Skin-on-Frame: Coaming with knee braces
By: Kudzu | 12/4/2008, 7:41 pm |
| Other: kayakforum.com isn't working
By: David Woodham | 12/4/2008, 7:23 am |
| Strip: Wood type for OI
By: Mark Rowley | 12/3/2008, 8:01 pm |
| Off Topic: skiing tomorrow
By: Bill Hamm | 12/3/2008, 6:07 pm |
| Review: instamapper
By: PatrickC | 12/3/2008, 5:34 pm |
| Seeking: Home made under the stern rudder
By: Belton Dykes | 12/3/2008, 11:13 am |
| S&G: shear clamps: bevel for inside boat?
By: wwfloyd | 12/2/2008, 10:52 pm |
| Skin-on-Frame: Huertea cubensis
By: danper | 12/2/2008, 7:20 pm |
| Skin-on-Frame: Skins and stiffnes
By: Kudzu | 12/2/2008, 5:31 pm |
| Other: NACA 00xx foil generator for Rhino *LINK*
By: eric | 12/2/2008, 4:53 pm |
| S&G: Point Bennett Chop Job *LINK* *Pic*
By: Duane Strosaker | 12/1/2008, 7:20 pm |
| Strip: Iggy finally finished!!! *Pic*
By: Gennie | 12/1/2008, 8:55 am |
| Other: molding hatch lips
By: kirk briggs | 11/30/2008, 9:41 pm |
| Skin-on-Frame: It looks like a boat... sort of. *LINK* *Pic*
By: Kudzu | 11/30/2008, 8:31 am |
| Other: Stealing design (aka intelectual property righs) *LINK*
By: skiffrace | 11/29/2008, 7:27 pm |
| Epoxy: filler coat
By: kirk briggs | 11/28/2008, 6:25 pm |
| Skin-on-Frame: Aleut Kayak *Pic*
By: Kudzu | 11/28/2008, 9:15 am |
| Strip: restoring cedar north canoe
By: greg knipe | 11/27/2008, 8:29 pm |
| Paddle: Thanksgiving Day paddle
By: Bill Hamm | 11/27/2008, 2:53 pm |
| Announce: Introduction and sawhorses *LINK*
By: John McGillivray | 11/27/2008, 2:20 pm |
| Skin-on-Frame: Loon under construction *Pic*
By: Kudzu | 11/27/2008, 8:06 am |
| Skin-on-Frame: Stringer/Gunwale Question
By: Danper | 11/26/2008, 10:30 am |
| Announce: Around the Great Lakes Expedition *LINK* *Pic*
By: Bryan Hansel | 11/25/2008, 7:41 pm |
| Tools: Scafing jig for table saw *Pic*
By: Kudzu | 11/25/2008, 6:45 pm |
| Epoxy: 404 High-density filler question
By: eric | 11/24/2008, 9:42 pm |
| Skin-on-Frame: Yost Sea Tour Question
By: John Van Buren | 11/24/2008, 7:43 pm |
| Paddle: 2pc to 4pc paddle conversion
By: Bruce Hamilton | 11/24/2008, 11:58 am |
| Skin-on-Frame: 180 Degree Turn form Stripper to SOF
By: Danp | 11/23/2008, 4:49 pm |
| Strip: Petrel question
By: Jim L | 11/22/2008, 10:46 am |
| Skin-on-Frame: Yost framing and cockpit sizing *LINK*
By: Kudzu | 11/22/2008, 10:42 am |
| Strip: strip deck with fiberglass hull
By: CSaloio | 11/21/2008, 12:25 pm |
| Strip: Follow along with a new build of a classic *LINK* *Pic*
By: Drifting Son | 11/21/2008, 1:13 am |
| Strip: changing cockpit
By: charlie r | 11/19/2008, 9:15 pm |
| Strip: finish question
By: kirk briggs | 11/19/2008, 8:37 pm |
| Paddle: Which Paddle ??
By: Glen Gray | 11/19/2008, 6:43 am |
| Off Topic: Another new computer
By: Bill Hamm | 11/19/2008, 1:02 am |
| Strip: About how many hours/months/years?
By: Danp | 11/18/2008, 9:35 pm |
| Strip: Wet sanding vs. dry sanding.
By: LesK | 11/18/2008, 3:17 pm |
| S&G: First problem with first build
By: Nate Lacy | 11/17/2008, 8:35 am |
| Strip: Deck and hull seam - got some mismatch - HELP
By: Bob Beaullieu | 11/17/2008, 8:00 am |
| Skin-on-Frame: New design *Pic*
By: Kudzu | 11/16/2008, 9:13 am |
| Epoxy: stip built
By: kirk briggs | 11/14/2008, 7:34 pm |
| Tools: new bandsaw
By: Bill Hamm | 11/14/2008, 9:37 am |
| Strip: Need two kayaks - his and hers
By: Danp | 11/13/2008, 8:28 pm |
| Skin-on-Frame: Yost stringer material
By: Kudzu | 11/13/2008, 10:03 am |
| S&G: New kayak launched
By: Alex Ferguson | 11/13/2008, 5:17 am |
| Strip: New book coming: Building Strip-Planked Boats *LINK*
By: Andreas | 11/12/2008, 7:01 am |
| S&G: Fishing Specific kayak Plans?
By: Todd R. | 11/11/2008, 8:35 pm |
| Off Topic: SCOTT DOLLMEYER
By: ED DOLLMEYER | 11/11/2008, 8:30 pm |
| Strip: Fast kayak for smaller guy
By: Ken F | 11/11/2008, 4:36 pm |
| S&G: New work begins on S&G Night Heron *LINK* *Pic*
By: Robert N Pruden | 11/11/2008, 4:09 pm |
| Strip: rice paper
By: river rat | 11/11/2008, 3:54 pm |
| S&G: First build ever
By: Nate Lacy | 11/11/2008, 8:02 am |
| Launching: S&G Dinghy- sail, row, motor *LINK* *Pic*
By: Steve Phillips | 11/11/2008, 2:20 am |
| Seeking: One night building kayak class
By: Kudzu | 11/10/2008, 8:51 pm |
| Strip: Last posting! *LINK*
By: Dave | 11/10/2008, 7:21 pm |
| Strip: Hatch hold down system *Pic*
By: Dave | 11/10/2008, 7:20 pm |
| Strip: Materials used
By: Dave | 11/10/2008, 12:06 am |
| Strip: Another try! *NM* *Pic*
By: Dave | 11/10/2008, 12:02 am |
| Strip: Outer Island finished!------WebKitFormBoundaryDaq7 *Pic*
By: Dave------WebKitFormBoundaryDaq7Ng2u5QQ4K+DV | 11/9/2008, 11:54 pm |
| Skin-on-Frame: HH 66 vinyl cement in Australia?
By: Allan | 11/9/2008, 6:28 pm |
| S&G: Scarf clamping pressure
By: Bohdan Szymanik | 11/9/2008, 3:16 pm |
| Other: Actually, not all is well now
By: skiffrace | 11/9/2008, 2:29 pm |
| S&G: Spring Run - first time build - pic *Pic*
By: Bob Beaullieu | 11/7/2008, 3:55 pm |
| Shop: Tape vs fillets
By: Kudzu | 11/7/2008, 12:45 pm |
| Other: Need Factory Skeg Illustration for Valley Boats
By: Kurt Maurer | 11/7/2008, 9:47 am |
| Off Topic: Posting pictures
By: Peter Sebbage | 11/7/2008, 7:38 am |
| Strip: adjustable footrest/pedals *Pic*
By: Peter Sebbage | 11/7/2008, 6:55 am |
| Strip: adjustable footrest/pedals
By: Peter Sebbage | 11/7/2008, 6:47 am |
| Strip: Best stripping technique for tight curves
By: Andy Waddington | 11/6/2008, 3:01 pm |
| Announce: Goodbye, many thanks and stuff for sale....
By: Bob Deutsch------WebKitFormBoundarySCDUgXIzzkJ+J+C | 10/26/2008, 3:01 pm |
| Material: Texas Bead & Cove Cedar Strip Source
By: Jake | 10/31/2008, 9:31 pm |
| Strip: Hatch Size & Position
By: Glen Gray | 11/3/2008, 3:00 am |
| Material: Varnish
By: Dave | 11/2/2008, 11:14 pm |
| Strip: Glassing Football Questions
By: Len Thunberg | 11/2/2008, 11:22 am |
| Other: Redfish Seats
By: Kudzu | 11/1/2008, 10:49 pm |
| Strip: system three resin
By: river rat | 11/1/2008, 8:59 pm |
| Strip: fibre glass wieght
By: river rat | 11/1/2008, 8:57 pm |
| Seeking: Suggestions for restoring Phoenix Isere
By: Larry C. | 11/1/2008, 5:19 pm |
| Other: Kayaking Books
By: Mike Scarborough | 11/1/2008, 3:03 pm |
| Other: RECESSED FITTINGS
By: Dennis | 10/31/2008, 9:00 pm |
| Paddle: Greenland Paddle #16 Built *LINK* *Pic*
By: Duane Strosaker | 10/31/2008, 8:22 pm |
| Material: Hatch bags *LINK* *Pic*
By: roger | 10/31/2008, 12:13 pm |
| Skin-on-Frame: Please Comment on this Kayak *Pic*
By: Andrew Elizaga | 10/30/2008, 7:40 pm |
| Off Topic: back after short unplanned break
By: Bill Hamm | 10/30/2008, 5:19 pm |
| Tools: $4 vacuum bag for small parts *LINK*
By: Mike Bielski | 10/30/2008, 1:48 pm |
| Strip: Cedar Strip NDK Explorer *LINK*
By: Bryan Hansel | 10/29/2008, 6:26 pm |
| Material: varnish
By: Dave in Minneapolis | 10/28/2008, 10:32 pm |
| S&G: OK... sorry to do it - but I have to...
By: petewp | 10/28/2008, 3:20 pm |
| Tools: Motor recovery *LINK* *Pic*
By: tony olsen | 10/28/2008, 9:17 am |
| Strip: Attaching deck lines - What's best way?
By: Bob Beaullieu | 10/27/2008, 9:33 am |
| Skin-on-Frame: paging Tom Yost
By: Bill Hamm | 10/27/2008, 3:52 am |
| Tools: Tip for removing rust from tools
By: tony olsen | 10/25/2008, 8:09 pm |
| Other: Attn John Bolding *LINK* *Pic*
By: tony olsen | 10/25/2008, 8:05 pm |
| Strip: internal stem
By: river rat | 10/25/2008, 7:52 pm |
| Strip: Form alignment & internal strongback
By: Chris Sperry | 10/25/2008, 9:36 am |
| Seeking: advice on tandem seating
By: fred graus | 10/25/2008, 8:27 am |
| Off Topic: everyone paddling today?
By: Bill Hamm | 10/25/2008, 12:15 am |
| Strip: new material *LINK*
By: jos vermeiren | 10/23/2008, 5:05 am |
| Strip: Opps, Missed a step, what to do now?
By: MacMcCaskie | 10/22/2008, 9:00 pm |
| Material: Hemlock as wood for strip
By: skiffrace | 10/22/2008, 10:09 am |
| Skin-on-Frame: Riser and twist in sheer
By: Kudzu | 10/21/2008, 8:17 am |
| S&G: Duct tape rather than wire
By: John Faas | 10/20/2008, 2:22 am |
| Strip: material
By: jos vermeiren | 10/19/2008, 4:29 pm |
| Seeking: modifying for better tracking -skeg or less rocker
By: ewan | 10/18/2008, 4:45 am |
| Seeking: Shipping to Canada
By: Gordon Clarke | 10/17/2008, 10:22 pm |
| Strip: Hello all !
By: Dan | 10/16/2008, 6:14 pm |
| Material: Reinforcing kevlar hull on the inside
By: Mihail | 10/16/2008, 1:41 pm |
| Strip: Building in Fiji *Pic*
By: John Caldeira | 10/15/2008, 5:11 pm |
| S&G: Putting the final finish on the Enterprise *LINK* *Pic*
By: Dan Millsip | 10/15/2008, 9:53 am |
| Launching: Finally, the Iggy got wet! *Pic*
By: Gennie | 10/14/2008, 4:50 pm |
| Tools: Dayton bandsaw?
By: Bill Hamm | 10/14/2008, 2:23 am |
| Strip: bulkheads
By: Dave in Minneapolis | 10/13/2008, 8:55 pm |
| Strip: One layer or two?
By: Darren | 10/12/2008, 7:02 pm |
| Strip: disko bay pix *Pic*
By: Bill Hamm | 10/12/2008, 6:18 pm |
| Material: Fiberglass Style 1678 experience? it's cheap. *LINK*
By: MacMcCaskie | 10/12/2008, 12:37 pm |
| Launching: New Sea Rover II *Pic*
By: David, Tasmania | 10/12/2008, 4:43 am |
| Epoxy: orange peel help
By: wirenut | 10/11/2008, 8:34 pm |
| Skin-on-Frame: SOF at Trexlertown
By: bill stupak | 10/11/2008, 8:02 pm |
| Paddle: Aleutian Paddle?
By: Scott Fitzgerrell | 10/10/2008, 4:11 pm |
| Strip: Night Heron's Bow
By: Mike Bielski | 10/10/2008, 9:14 am |
| Skin-on-Frame: F1 build question
By: bill stupak | 10/10/2008, 8:35 am |
| Strip: Location of seat on Night Heron
By: Peter Sebbage | 10/10/2008, 7:38 am |
| Paddle: Two new paddles *Pic*
By: Kudzu | 10/9/2008, 11:27 pm |
| S&G: To begin...
By: André Lauand Ribeiro | 10/9/2008, 8:20 am |
| Epoxy: Newbie needs Supplies, help needed
By: MacMcCaskie | 10/8/2008, 10:55 pm |
| Other: Practical differences in length
By: Kudzu | 10/8/2008, 7:53 pm |
| Skin-on-Frame: A pair of funky hardshells *Pic*
By: Dave Gentry | 10/8/2008, 9:48 am |
| Paddle: Take apart GP
By: Charles Robinson | 10/8/2008, 9:00 am |
| Skin-on-Frame: kevlar skin...? Been done?
By: James | 10/8/2008, 8:41 am |
| Strip: Sedna 15ft Great Auk *Pic*
By: Mike L | 10/7/2008, 8:39 am |
| Skin-on-Frame: need help with canvas
By: sporty | 10/6/2008, 11:33 pm |
| Strip: Syntex or glass
By: bueller | 10/6/2008, 9:07 pm |
| Epoxy: Joingin fiberglass cloth for coverage
By: Darren | 10/6/2008, 5:55 pm |
| Strip: Transporting a strip hull
By: Jim Michlewski | 10/6/2008, 5:35 pm |
| Other: inflatable Yost folders?
By: James W | 10/6/2008, 5:00 pm |
| Strip: glassing the inside hull
By: risto | 10/6/2008, 4:24 pm |
| Strip: Launching Redfish King *LINK*
By: Christian Grejsen | 10/6/2008, 11:51 am |
| Seeking: Plastic for a Yost folder
By: John Faas | 10/5/2008, 10:20 pm |
| Epoxy: In & out glass weights on strip boats
By: Darren | 10/5/2008, 7:50 pm |
| S&G: Glassing inside of panels?
By: Paul Sylvester | 10/4/2008, 7:04 am |
| S&G: Keel strip for S&G
By: Jason Swan | 10/3/2008, 3:06 pm |
| Launching: New Hybrid *LINK* *Pic*
By: Joy | 10/3/2008, 2:42 pm |
| Announce: MAB tomorrow! SouthEast Michigan Kayak Builders
By: ChuckS | 10/3/2008, 10:02 am |
| S&G: Arctic Hawk
By: John Faas | 10/3/2008, 1:27 am |
| Review: Surfyak performance
By: Ryan Scott | 10/2/2008, 4:00 pm |
| S&G: West Marine Epoxy
By: Yakalactic | 10/2/2008, 10:30 am |
| Skin-on-Frame: Cutting Nylon Fabric
By: Kyle H. | 10/2/2008, 9:20 am |
| Shop: Carbon Fiber Coaming Lip - How many glass layers?
By: Bob Beaullieu | 10/1/2008, 10:18 am |
| S&G: Repair Advice, Please - S&G Hull Crack
By: vk1nf | 10/1/2008, 9:54 am |
| Strip: new bulkhead material
By: Bill Hamm | 9/29/2008, 5:56 pm |
| Other: You all are wrong!
By: Tommy | 9/28/2008, 9:41 pm |
| Epoxy: Graphite coating
By: Darren | 9/28/2008, 7:29 am |
| Strip: Night Heron - high or normal deck
By: Darren | 9/28/2008, 7:24 am |
| Review: Meguiars Flagship wax
By: PatrickC | 9/27/2008, 11:41 am |
| Seeking: molded hatch recess
By: Paul Grant | 9/26/2008, 10:29 pm |
| Strip: Breakaway forms
By: John Sullivan | 9/26/2008, 6:19 pm |
| Strip: rolling bevel: first stripper => gaps inside hull
By: Chris Sperry | 9/26/2008, 3:37 pm |
| Skin-on-Frame: SEA OTTER-R ROCKER *Pic*
By: JOEL DELASHMIT | 9/26/2008, 12:39 pm |
| Strip: foam core kayak *LINK*
By: Misterphil | 9/26/2008, 11:21 am |
| S&G: urethane over paint???
By: Ryan Stephenson | 9/26/2008, 10:13 am |
| Seeking: molded hatch recess
By: Paul Grant | 9/25/2008, 11:10 am |
| Strip: Night Heron finally on the water *LINK* *Pic*
By: Kyle T | 9/25/2008, 11:08 am |
| Epoxy: Graphite?
By: Aaron B. | 9/24/2008, 12:16 pm |
| Strip: stretching a Guillemot L
By: paul killen | 9/24/2008, 4:28 am |
| S&G: more progress *LINK* *Pic*
By: Brian T. Cunningham | 9/23/2008, 11:48 pm |
| Strip: Sealing coat mess
By: Len Thunberg | 9/23/2008, 9:49 pm |
| Strip: aligning forms on strongback
By: Paul Killen | 9/23/2008, 5:43 pm |
| Other: Accuracy: Delftship And Background Images
By: Ken Blanton | 9/23/2008, 10:38 am |
| Skin-on-Frame: Back in black *LINK* *Pic*
By: Aaron H | 9/22/2008, 6:21 pm |
| Off Topic: Coulda Done Without It *Pic*
By: Kurt Maurer | 9/21/2008, 6:56 pm |
| Strip: Whitewater play designs
By: Andy Waddington | 9/21/2008, 6:36 pm |
| Strip: ommitting glass sheating on kayak
By: Arthur Jacobs | 9/21/2008, 6:48 am |
| Announce: Meet at the Beach, SE Michigan *LINK*
By: ChuckS | 9/20/2008, 10:42 pm |
| Launching: Sea Sled plastic wrap test *LINK* *Pic*
By: Carl Delo | 9/20/2008, 5:33 pm |
| Material: kevlar: pros and cons
By: james williams | 9/20/2008, 11:31 am |
| Material: maybe I'm doing this wrong
By: Brian Schulz | 9/19/2008, 6:35 pm |
| Off Topic: Photos *LINK*
By: Kudzu | 9/19/2008, 2:33 pm |
| Other: Which wood boat for my 7yr old son??
By: Bob Beaullieu | 9/19/2008, 1:49 pm |
| Material: is 2 layers of 8oz glass enough?
By: Brian Schulz | 9/19/2008, 12:10 pm |
| Strip: bead and cove cutters
By: John Craun | 9/19/2008, 10:51 am |
| Epoxy: Little bubbles after applying epoxy to fiberglass
By: martin sarocky | 9/18/2008, 8:41 pm |
| Strip: perimeter line fasteners
By: Dave | 9/18/2008, 8:11 pm |
| Material: E glass
By: Kim | 9/18/2008, 1:55 pm |
| S&G: rudder or not
By: John Faas | 9/18/2008, 3:55 am |
| Epoxy: Out gassing
By: John Faas | 9/18/2008, 3:54 am |
| S&G: Swiftwood *LINK* *Pic*
By: Brian T. Cunningham | 9/17/2008, 9:01 pm |
| Strip: Seeking advise for a second build
By: jeff mcgee | 9/17/2008, 1:14 pm |
| Skin-on-Frame: Sea Bee?
By: Bill Hamm | 9/17/2008, 2:27 am |
| Strip: Cutting deck for Recessed Cockpit
By: MacMcCaskie | 9/16/2008, 10:34 pm |
| Off Topic: Kayaker breaks own leg to avoid drowning *LINK*
By: Jesper bach | 9/16/2008, 11:22 am |
| Seeking: Info on Tony Olsen ??
By: John Bolding | 9/15/2008, 4:31 pm |
| Other: Njord vs. Outer Island
By: Ralph Merriman | 9/15/2008, 1:45 pm |
| Strip: Cockpit Length???? Need Advice
By: Bob Beaullieu | 9/15/2008, 7:54 am |
| Strip: Joining on the Sheer
By: Simeon | 9/14/2008, 10:35 pm |
| Announce: South East Michigan Kayak Builders
By: ChuckS | 9/14/2008, 9:45 am |
| Strip: Cockpit Rim
By: Glen Gray | 9/14/2008, 3:29 am |
| Strip: "Azure" Njord Building Updates *Pic*
By: Dan Caouette (CSFW) | 9/12/2008, 4:02 pm |
| Other: dry suit booties
By: don f | 9/12/2008, 2:34 pm |
| Other: Boatbuilding On The Radio *LINK* *Pic*
By: Pawistik | 9/12/2008, 1:31 am |
| Strip: Strip Planking a Rowing Shell
By: Ned Smith | 9/11/2008, 10:27 am |
| Off Topic: A little levity for today, eh! *LINK* *Pic*
By: Robert N Pruden | 9/10/2008, 6:14 pm |
| Skin-on-Frame: catamaran kayak update
By: Bill Hamm | 9/10/2008, 7:35 am |
| Epoxy: Epoxy sanding problems
By: Pat Pierce | 9/10/2008, 3:12 am |
| Material: Kayak Storage Rack
By: Bill | 9/9/2008, 8:49 pm |
| Other: KOKATAT SuperNova Dry suit?
By: Kudzu | 9/9/2008, 5:07 pm |
| Other: So wierd I had to share *LINK*
By: Tom Raymond | 9/9/2008, 3:06 pm |
| Strip: How many layers of fiberglass for hull & stems?
By: Bob Beaullieu | 9/9/2008, 10:53 am |
| Material: fiberglass questions? *Pic*
By: Brian Schulz | 9/9/2008, 1:46 am |
| Material: Need HDPE - Help
By: Bryan Hansel | 9/8/2008, 10:36 pm |
| Off Topic: Hurricane Ike
By: Robert N Pruden | 9/8/2008, 10:01 pm |
| Strip: Help in deciding on a design to build
By: RickSp | 9/8/2008, 10:09 am |
| Strip: Breakaway Forms
By: Patrick Dallain | 9/7/2008, 10:04 am |
| Launching: 2 at once *Pic*
By: Mark Rowley | 9/7/2008, 8:44 am |
| Epoxy: Re-glassing deck
By: Glen Gray | 9/7/2008, 6:53 am |
| Strip: Scaling a 40' Canoe
By: Reg Lake | 9/5/2008, 6:13 pm |
| Strip: Outer Island question
By: James | 9/5/2008, 1:23 pm |
| Other: I could use a little help
By: Paul Lawler | 9/3/2008, 9:28 pm |
| Off Topic: Florida Kayaker Drowns in Banff
By: Robert N Pruden | 9/3/2008, 8:02 pm |
| Other: Dry suits
By: Kudzu | 9/3/2008, 11:04 am |
| Strip: Wave designs on strip hulls
By: Darren | 9/2/2008, 11:19 pm |
| Announce: Paddle Quest
By: Justin L. | 9/2/2008, 5:55 pm |
| Launching: "The Raisin" *Pic*
By: Aaron H | 9/2/2008, 11:38 am |
| Other: Inspiration wanted for rudder control
By: Darren | 9/1/2008, 9:55 pm |
| Other: Kayak Trailer
By: Kudzu | 9/1/2008, 8:09 pm |
| Launching: Iggy *LINK* *Pic*
By: Bryan Hansel | 8/31/2008, 7:00 pm |
| Other: electric bilge pump *LINK*
By: misterphil | 8/31/2008, 4:40 pm |
| Skin-on-Frame: sealing cedar stringers
By: Carl Delo | 8/30/2008, 12:39 am |
| Strip: strips of poplar rot resistance
By: ramiro vera | 8/29/2008, 11:51 pm |
| Other: Joe Greenley in Fortune Magazine
By: Ken Brunton | 8/28/2008, 4:22 pm |
| Launching: Thanks for the help - My brother is happy! *Pic*
By: Jerry S | 8/28/2008, 1:46 pm |
| S&G: Surface mounted methods for deck lines
By: John Faas | 8/27/2008, 1:43 am |
| Epoxy: Finishing sanding
By: podge | 8/26/2008, 3:29 pm |
| Paddle: laminating a bent shaft *LINK* *Pic*
By: Doug Smith | 8/26/2008, 12:25 pm |
| S&G: kid's kayak
By: DavidS | 8/25/2008, 6:15 pm |
| Strip: Iggy - Coat One *LINK* *Pic*
By: Bryan Hansel | 8/24/2008, 6:28 pm |
| Announce: Interested a "Maine Meet at the Beach?"
By: Rob Macks / Laughing Loon CC&K | 8/22/2008, 11:52 am |
| Review: kUCLzYVUFqOUGvPDDwK *LINK* *Pic*
By: buy arava | 8/22/2008, 12:19 am |
| S&G: My boat got a Nose Job. How to fix? *Pic*
By: Kudzu | 8/21/2008, 11:25 pm |
| Tools: Freeship or Bearboat
By: Mike Bielski | 8/21/2008, 12:04 pm |
| S&G: Hybrid *Pic*
By: Brad Shook | 8/21/2008, 9:04 am |
| Launching: ONE OCEAN STORM SLT *LINK* *Pic*
By: Scott Fitzgerrell | 8/20/2008, 7:51 pm |
| Material: Foam bulkheads
By: David Woodham | 8/20/2008, 11:34 am |
| Skin-on-Frame: Trailer idea *Pic*
By: Kudzu | 8/20/2008, 8:55 am |
| Tools: bead and cove
By: AD | 8/19/2008, 6:59 am |
| Strip: tech stuff
By: AD | 8/18/2008, 10:46 pm |
| Strip: Short double advice
By: tkennefick | 8/18/2008, 3:04 pm |
| Other: Midnight paddle *Pic*
By: Kudzu | 8/18/2008, 1:50 pm |
| Skin-on-Frame: Frame completed (more or less...) *LINK* *Pic*
By: Aaron H | 8/18/2008, 12:05 pm |
| Other: Rudder systems
By: Gary Walsh | 8/17/2008, 5:54 pm |
| Material: (Beginner) redwood questions *LINK*
By: Johh Williams | 8/17/2008, 3:17 pm |
| Material: Automotive paint?
By: Gennie | 8/17/2008, 12:07 pm |
| Seeking: experienced maker to varnish-install
By: Menne | 8/17/2008, 12:03 pm |
| Epoxy: epoxy
By: AD | 8/16/2008, 11:10 pm |
| Skin-on-Frame: Its taking shape! *LINK* *Pic*
By: Aaron H | 8/16/2008, 11:49 am |
| Seeking: Good ideas for a trailer?
By: Kudzu | 8/15/2008, 10:47 pm |
| Strip: Sun Damage
By: Flatlander | 8/15/2008, 7:02 pm |
| Skin-on-Frame: Balsa!? Should I usei t?
By: blue | 8/15/2008, 3:39 pm |
| Strip: Need Help Choosing a Strip Kayak Design *LINK*
By: Peter Bruckmann | 8/15/2008, 2:54 pm |
| Strip: Just a test
By: chris jacobson | 8/14/2008, 5:43 pm |
| S&G: Mold appearing on my deck
By: Jim Hoagland | 8/14/2008, 1:17 pm |
| Epoxy: Edge delamination
By: Glen Gray | 8/13/2008, 4:13 am |
| Off Topic: glue for plastic
By: Dana | 8/12/2008, 9:50 pm |
| Announce: 20th Annual Delmarva Paddlers Retreat 17-19 Oct *LINK* *Pic*
By: Edward J. Zachowski | 8/12/2008, 6:12 pm |
| S&G: Pyrography Osprey *Pic*
By: Charles Robinson | 8/11/2008, 8:30 pm |
| S&G: Old Varnish
By: Charles Robinson | 8/11/2008, 6:59 pm |
| Strip: Installing Thigh braces to coaming wall
By: Bob Beaullieu | 8/11/2008, 3:50 pm |
| Material: Pygmy-like backrest
By: JT Smith | 8/11/2008, 2:41 pm |
| Other: Plywood sailboat opinions
By: Chris Ayles | 8/11/2008, 11:19 am |
| S&G: Bonding Strength of Micro Balloon Fillet
By: Steve Nieman | 8/10/2008, 9:32 pm |
| Strip: hatch cover on expedition single
By: kirk Briggs | 8/10/2008, 6:57 pm |
| Skin-on-Frame: Staples instead of stitches?!
By: Michael Collins | 8/9/2008, 11:22 pm |
| Strip: Which Kayak?
By: John S | 8/8/2008, 3:19 pm |
| Skin-on-Frame: catamaran kayak update
By: Bill Hamm | 8/8/2008, 1:16 pm |
| Announce: Wood Kayak Rendezvous 2009 *LINK* *Pic*
By: Ted Henry | 8/8/2008, 11:10 am |
| Shop: widest part of the boat
By: PatrickC | 8/7/2008, 10:37 pm |
| Other: West Coast Rendezvous *LINK* *Pic*
By: Ted Henry | 8/7/2008, 12:29 am |
| Skin-on-Frame: Tyvek skin?
By: JohnK | 8/7/2008, 12:10 am |
| Seeking: collective wisdom *Pic*
By: dave | 8/6/2008, 6:20 pm |
| Strip: Varnish touch-up?
By: Tracey G. | 8/6/2008, 5:30 pm |
| Announce: George Dyson's Mount Fairweather
By: Reg Lake | 8/6/2008, 2:32 pm |
| Strip: cockpit recess
By: bill | 8/5/2008, 1:25 pm |
| Paddle: Wood for GP
By: Kudzu | 8/5/2008, 12:00 pm |
| Strip: Trouble on the horizon
By: Jim L | 8/5/2008, 8:03 am |
| Strip: Fiberglass bulkheads *LINK* *Pic*
By: Bryan Hansel | 8/4/2008, 5:56 pm |
| S&G: Rob Bryan Seguin Kayak *LINK*
By: Brad Shook | 8/4/2008, 3:22 pm |
| Paddle: lengthening a paddle
By: Dana | 8/4/2008, 1:46 pm |
| Epoxy: How do you mix epoxy and for how long?
By: John Faas | 8/3/2008, 10:27 pm |
| Skin-on-Frame: Which Yost design to build?
By: Paul Van Benschoten | 8/3/2008, 9:00 pm |
| Other: Surf kayak
By: Pedro Almeida | 8/3/2008, 8:28 pm |
| Epoxy: How big of a problem do I have?
By: John Faas | 8/3/2008, 6:42 pm |
| Strip: Another King launched! *LINK* *Pic*
By: Dale Benham | 8/3/2008, 3:34 pm |
| S&G: first coat on SOF
By: Bill Stupak | 8/3/2008, 2:47 pm |
| Skin-on-Frame: how deep should the keel be?
By: Peter Bourque | 8/3/2008, 1:35 pm |
| Material: styrofoam boats?
By: PatrickC | 8/2/2008, 12:30 pm |
| Skin-on-Frame: fabric choices
By: Kudzu | 8/2/2008, 8:31 am |
| Strip: flexed end form
By: elisha pope | 8/1/2008, 5:35 pm |
| Strip: Radial Arm Saw & Cordovan Stain
By: Belton Dykes | 8/1/2008, 11:29 am |
| Announce: Yea! Reg Lake
By: Randy Knauff | 7/31/2008, 3:43 pm |
| Tools: Boiling the Stapler
By: Jay Babina | 7/31/2008, 1:39 pm |
| Skin-on-Frame: Radius for corners under the skin
By: Carl Delo | 7/31/2008, 12:02 am |
| Off Topic: Check out this You TUbe Video...amazing... *LINK*
By: Robert N Pruden | 7/30/2008, 11:45 pm |
| Strip: Sassafras
By: Scot Norris | 7/30/2008, 6:08 am |
| Other: Respirator Humor/Question
By: Brion | 7/29/2008, 8:33 pm |
| Other: warped hatch *Pic*
By: Clayton Plunkett | 7/29/2008, 7:05 pm |
| Strip: Help identifying types of wood I have... *LINK* *Pic*
By: Brion | 7/29/2008, 4:09 pm |
| Other: Warped Hatch
By: Charles Robinson | 7/29/2008, 2:53 pm |
| S&G: Moby Hatches
By: Charles Robinson | 7/29/2008, 1:35 pm |
| Epoxy: Tinting epoxy, does it take longer to cure? *Pic*
By: Jerry | 7/29/2008, 10:46 am |
| Strip: table saw?
By: CH10 | 7/29/2008, 9:18 am |
| Strip: when to you splice strips?
By: MacMcCaskie | 7/29/2008, 7:22 am |
| Strip: hatch gaskets------WebKitFormBoundary743ceJ3x+TLUx
By: Dave------WebKitFormBoundary743ceJ3x+TLUxoGs | 7/28/2008, 10:54 pm |
| Skin-on-Frame: First SOF Aleut Kayak - Link to construction blog *LINK*
By: dbynoe | 7/28/2008, 9:14 pm |
| Strip: Help with Stapleless...
By: Brion | 7/27/2008, 10:34 am |
| Review: Bill Hamm's Test Boat.
By: John Monroe | 7/27/2008, 5:11 am |
| Other: What volume for airbags
By: jeff mcgee | 7/26/2008, 11:12 pm |
| Epoxy: weave showing
By: Ron Wiebe | 7/26/2008, 10:01 pm |
| Strip: Acid Test
By: Greg Clopton | 7/26/2008, 12:15 am |
| Launching: One Ocean Kayaks launch *Pic*
By: Jugi | 7/25/2008, 8:57 pm |
| Strip: Varnish prep - mineral spirits?
By: Tracey G. | 7/24/2008, 5:27 pm |
| Launching: Sea Flea # 2 *LINK* *Pic*
By: kelly t | 7/24/2008, 1:32 am |
| Launching: A new Redfish Parr *Pic*
By: Clayton Plunkett | 7/23/2008, 9:37 pm |
| Announce: WCHA Reunion and Bear Mountain Rendezvous *Pic*
By: Glen Smith | 7/23/2008, 7:05 pm |
| Strip: Seam, both at once?
By: Tim | 7/23/2008, 11:39 am |
| Other: Hatch hold down system
By: Dave | 7/22/2008, 11:42 pm |
| Launching: Guillemot Double *Pic*
By: Papa Bear | 7/22/2008, 2:23 pm |
| Announce: R2K8 - Wooden Kayak Rendezvous *LINK* *Pic*
By: Joe Greenley | 7/22/2008, 1:40 pm |
| S&G: End pour and micro balloons
By: Steve Nieman | 7/22/2008, 7:51 am |
| S&G: Finish and gluing advice *Pic*
By: Jerry | 7/21/2008, 5:35 pm |
| Strip: Night Heron question
By: Brad Shook | 7/21/2008, 3:27 pm |
| Epoxy: Epoxy blisters?
By: Kudzu | 7/21/2008, 1:10 pm |
| Skin-on-Frame: how secure must masik be?
By: Peter Bourque | 7/21/2008, 12:11 pm |
| Strip: 3D model for a seat
By: Tim | 7/21/2008, 10:48 am |
| Tools: Strongback *Pic*
By: Simeon | 7/20/2008, 6:21 pm |
| Tools: mobile shop
By: Bill Hamm | 7/20/2008, 4:23 pm |
| Other: Welcome back
By: Robin Boys | 7/20/2008, 3:23 pm |
| ADMIN! Script Problems
By: Nick Schade - Guillemot Kayaks | 7/20/2008, 2:16 pm |
| Other: Test Posting
By: Mike Scarborough | 7/16/2008, 7:25 am |
| Launching: Sea Tour 17R *LINK* *Pic*
By: Sean | 7/11/2008, 9:16 am |
| old fiberglass
By: Ron Wiebe | 7/10/2008, 10:44 pm |
| S&G cargo box? *Pic*
By: Erik Wahlstrom | 7/10/2008, 6:24 pm |
| My puprle paddle *Pic*
By: Kudzu | 7/10/2008, 5:12 pm |
| Skeg
By: Tim | 7/10/2008, 4:14 pm |
| Script upgrade
By: Nick Schade - Guillemot Kayaks | 7/10/2008, 3:40 pm |
| Epoxy: epoxy blues
By: Berkeley Choate | 7/9/2008, 11:59 pm |
| Strip: Redfish King finally launched *Pic*
By: Steve Rasmussen | 7/9/2008, 4:28 pm |
| Seeking: info on boat size
By: NiraSue | 7/9/2008, 1:54 pm |
| S&G: Wren-some photos *Pic*
By: Kudzu | 7/9/2008, 11:06 am |
| Paddle: Making Kid Size Greenland Paddle
By: ToddT | 7/8/2008, 12:09 pm |
| Strip: glassing deck
By: Glen Gray | 7/8/2008, 7:10 am |
| Epoxy: Cloth width & hardener type
By: QuicksilverMike | 7/8/2008, 5:18 am |
| Skin-on-Frame: Stem Design *LINK*
By: Michael Collins | 7/7/2008, 8:35 pm |
| Skin-on-Frame: F1 Interpretation buildalong *Pic*
By: Michael Collins | 7/7/2008, 8:18 pm |
| Skin-on-Frame: Converting a design to SOF Yost style?
By: Kudzu | 7/7/2008, 6:48 pm |
| Strip: Iggy Seams - Back in Black *Pic*
By: Bryan Hansel | 7/7/2008, 5:36 pm |
| Skin-on-Frame: Sea Tour Double *Pic*
By: Tom Yost | 7/7/2008, 5:30 pm |
| Skin-on-Frame: Translucent PVC?
By: Michael Collins | 7/7/2008, 3:25 pm |
| Skin-on-Frame: rope coaming lip : glue question
By: kelly t | 7/6/2008, 4:48 pm |
| S&G: Attaching Shock Cord
By: Charles Robinson | 7/6/2008, 11:34 am |
| Skin-on-Frame: Nylon skinning on Yost Sea Cruiser?
By: Bill Stupak | 7/6/2008, 9:07 am |
| Other: Sealing Plywood?
By: Michael Collins | 7/5/2008, 7:57 pm |
| Material: Seattle area strip source?
By: Brion | 7/5/2008, 6:32 pm |
| Tools: table saw stand
By: Bill Hamm | 7/5/2008, 4:52 pm |
| Skin-on-Frame: The difference of half an inch *LINK* *Pic*
By: Michael Collins | 7/4/2008, 7:41 pm |
| Material: Wood for coaming, what are my choices?
By: Jerry | 7/4/2008, 6:28 pm |
| Epoxy: Whats the difference?
By: Alex Leitso-Thom | 7/4/2008, 4:44 pm |
| S&G: another varnish question
By: bromasi | 7/4/2008, 2:57 pm |
| Launching: More time in Wren paddling
By: Kudzu | 7/3/2008, 10:04 pm |
| Off Topic: the most orriginal homebuilt "kayak"
By: Bill Hamm | 7/3/2008, 6:21 pm |
| Off Topic: Buyer Beware
By: Michael Collins | 7/3/2008, 4:52 pm |
| Seeking: dual control skeg?
By: Randy Knauff | 7/3/2008, 12:14 pm |
| Epoxy: Fiber glass print through
By: Dale Welch | 7/2/2008, 11:13 am |
| Skin-on-Frame: Seeking online source for PVC fabric *LINK*
By: ToddT | 7/2/2008, 9:57 am |
| Skin-on-Frame: Sea Flea No. 2 *Pic*
By: kelly t | 7/2/2008, 3:52 am |
| Material: okoume plywood Chicago
By: Bill Hamm | 7/2/2008, 2:14 am |
| Skin-on-Frame: Cape Falcon F1
By: Michael Collins | 7/2/2008, 1:18 am |
| Skin-on-Frame: Sea Sled catamaran prototype *LINK*
By: Carl Delo | 7/1/2008, 11:36 pm |
| Epoxy: Question on 2nd coat application *Pic*
By: tfurey7 | 7/1/2008, 1:00 pm |
| Skin-on-Frame: Bristol Finish 2 part Urethane *LINK*
By: Brad Shook | 7/1/2008, 11:36 am |
| Material: urethane options? *LINK*
By: Tony Haley | 7/1/2008, 12:20 am |
| Strip: question about joining hull and deck
By: James Atkins | 6/30/2008, 10:31 pm |
| Skin-on-Frame: restoration/ repair? *LINK*
By: William Clarke | 6/29/2008, 10:23 pm |
| Announce: all aluminum kayak
By: steve chatman | 6/29/2008, 9:18 pm |
| Material: AGB
By: BillB | 6/29/2008, 5:45 pm |
| S&G: Stitching Woes *Pic*
By: Michael Collins | 6/29/2008, 12:24 pm |
| S&G: Building the Hybrid Night Heron *Pic*
By: Michael Collins | 6/29/2008, 12:35 am |
| Material: Problem with ripples in glass cloth surface
By: Cliff | 6/28/2008, 4:28 pm |
| Material: Wrong Manual Arrived, Need 'Glass
By: Michael Collins | 6/28/2008, 11:37 am |
| Skin-on-Frame: temp skin choice
By: Carl Delo | 6/27/2008, 11:32 pm |
| Strip: Ever enlarge a cockpit?
By: Kudzu | 6/27/2008, 7:33 pm |
| Seeking: decorative strip patterns
By: Rod Tait (Orca Boats) | 6/27/2008, 10:39 am |
| Launching: Sea Flea *LINK* *Pic*
By: Pawistik | 6/27/2008, 1:46 am |
| Strip: Seeking supplier of wood strips
By: Anders | 6/27/2008, 12:52 am |
| Skin-on-Frame: Just to let you all know I haven't abandoned ship *LINK*
By: Sean | 6/26/2008, 11:10 pm |
| Seeking: Build that boat *LINK*
By: Christian Grejsen | 6/26/2008, 5:53 pm |
| S&G: Cutting Plywood Panels
By: Michael Collins | 6/26/2008, 11:13 am |
| Tools: Stapler *LINK*
By: Dave Stoup | 6/26/2008, 9:48 am |
| Paddle: Greenland versus euro paddle
By: graham | 6/26/2008, 5:36 am |
| Paddle: Carbon Fiber Greenland Paddle-19 oz. *LINK* *Pic*
By: Duane Strosaker | 6/26/2008, 12:18 am |
| S&G: Stitching Wire
By: Michael Collins | 6/25/2008, 3:24 pm |
| Off Topic: Future of Fort Worden *Pic*
By: Roger Nuffer | 6/25/2008, 10:31 am |
| Material: Gelcoat repair on kevlar hull
By: Doug Manfred | 6/25/2008, 9:55 am |
| Epoxy: weave
By: Dave | 6/24/2008, 11:41 pm |
| Launching: Wren photos. *LINK*
By: Kudzu | 6/24/2008, 11:03 pm |
| Tools: Belt Sander Needed
By: Ted Henry | 6/24/2008, 6:55 pm |
| Strip: Have a choice to make
By: Dave | 6/24/2008, 6:30 pm |
| Material: How Much Epoxy?
By: Outkayaking | 6/24/2008, 5:18 pm |
| Off Topic: Best Photo Site?
By: Brad Shook | 6/24/2008, 12:50 pm |
| Material: Titebond II
By: Dave Stoup | 6/24/2008, 9:40 am |
| Other: A varnishing question
By: jeff mcgee | 6/23/2008, 12:30 pm |
| Strip: Glass Bulkheads
By: Bryan Hansel | 6/23/2008, 10:20 am |
| Tools: Ryobi BTS21 table saw
By: Bill Hamm | 6/23/2008, 1:51 am |
| Strip: Hull Issues
By: Outkayaking | 6/22/2008, 7:15 pm |
| Material: Marylou Hernandez *LINK* *Pic*
By: Spencer Fisher | 6/22/2008, 11:19 am |
| Launching: WREN is launched *Pic*
By: Kudzu | 6/21/2008, 9:52 pm |
| Skin-on-Frame: One beautiful kayak *LINK*
By: Christian Grejsen | 6/21/2008, 5:34 pm |
| Material: Resources and Materials
By: Michael Collins | 6/21/2008, 5:14 pm |
| Other: Skirt choice for Yost Sea Tour 17R
By: Sean | 6/21/2008, 3:14 pm |
| S&G: Almost ready for the water *Pic*
By: Kudzu | 6/21/2008, 1:18 pm |
| Material: Christi Richards *LINK* *Pic*
By: Diann George | 6/21/2008, 12:46 pm |
| Strip: Epoxy last night...
By: Tim | 6/20/2008, 12:07 pm |
| Other: looking for hung-seat recommendations
By: Carl Delo | 6/20/2008, 11:18 am |
| Strip: Forms on the Strongback
By: DaveS | 6/20/2008, 9:12 am |
| Strip: Toothpicks for staple holes
By: Glen Gray | 6/20/2008, 6:43 am |
| Skin-on-Frame: seats of wood builds vs SOF
By: Scott Shurlow | 6/19/2008, 6:54 pm |
| Other: A possible bow loop idea
By: jeff mcgee | 6/19/2008, 5:44 pm |
| Off Topic: Mariner Coaster stip built?
By: David S. | 6/19/2008, 4:40 pm |
| Other: Sonnet "Double" by Tom Yost solo?
By: Thomas T. | 6/19/2008, 3:31 pm |
| Off Topic: Ashley Edwards *LINK* *Pic*
By: Simon Gates | 6/19/2008, 1:46 pm |
| S&G: comparing point bennett and cormorant
By: dave | 6/19/2008, 7:17 am |
| Material: Ty Snow *LINK* *Pic*
By: Roseanne Bradley | 6/19/2008, 4:33 am |
| S&G: 1088 Face Difference
By: Michael Collins | 6/18/2008, 9:15 pm |
| Epoxy: How many Layers of fabric?
By: Steve Vanderstelt | 6/18/2008, 7:58 pm |
| Strip: Adirondack Guide Boat
By: Bill B | 6/18/2008, 5:03 pm |
| Strip: Petrel question
By: Jim L | 6/18/2008, 2:09 pm |
| Material: what to use for lashing
By: Peter Bourque | 6/18/2008, 2:00 pm |
| Material: Helmsman Spar Urethane (for Cardboard)
By: Ken | 6/18/2008, 11:11 am |
| Epoxy: Clean up of self and tools
By: john faas | 6/17/2008, 6:45 pm |
| Off Topic: Message for Donovan Harper
By: Brad Shook | 6/17/2008, 3:19 pm |
| Seeking: Back band or backrest ideas
By: Kudzu | 6/17/2008, 2:01 pm |
| Seeking: U.P. of Michigan woodenkayak symposium
By: Randy Ricchi | 6/16/2008, 10:45 pm |
| Other: Retractable skeg control/slider?
By: Todd Sullivan | 6/16/2008, 5:28 pm |
| Tools: Mesh sanding disks
By: Mike Bielski | 6/16/2008, 1:21 pm |
| Other: Shearwater knee braces
By: Charles Russell | 6/15/2008, 1:24 pm |
| Epoxy: fast cure okay for fillets?
By: Randy Ricchi | 6/14/2008, 10:11 am |
| Strip: white cedar
By: brian mcd | 6/14/2008, 7:34 am |
| Strip: Stem issues
By: Kimmer Olesak | 6/13/2008, 10:17 am |
| Strip: Ripping Strips - Workflow & Sawdust *LINK* *Pic*
By: Joe Greenley | 6/12/2008, 11:26 pm |
| Strip: fence extensions
By: John Enyart | 6/12/2008, 6:50 am |
| Strip: This Could Be A Stripper For Me *LINK* *Pic*
By: John Monroe | 6/11/2008, 5:38 am |
| Strip: Night Heron form spacing
By: Daryl Starnes | 6/10/2008, 9:48 pm |
| Other: gas mileage while car topping?
By: Bill Hamm | 6/2/2008, 5:57 pm |
| Seeking: SOF to build
By: Kyle H. | 5/20/2008, 12:52 am |
| S&G: I finally finished my AT 14!!!!! *LINK* *Pic*
By: Dee Ann | 5/6/2008, 1:28 am |
| S&G: Another generation of kayak builder *LINK* *Pic*
By: Dan Millsip | 5/5/2008, 2:52 am |
| Skin-on-Frame: Brush or Roll on oil based spar urethane?
By: Brent | 4/17/2008, 4:34 pm |
| Epoxy: Fill coat tricks with Raka?
By: Kudzu | 4/5/2008, 4:16 pm |
| Hild support calculator *LINK* *Pic*
By: HywqUkok | 3/27/2008, 1:14 pm |
