Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

cutting a scarf
By:Jason
Date: 4/4/2000, 3:52 pm
In Response To: Re: Scarf joint problem (1/4" x 3/16 strips) (Bill Heuser)

All I do to make my scarfs is to free hand cut them on my scroll saw. It has a nice fine tooth and gives me a nice clean cut. I always get a joint that matches.

But then I have never had this kind of problem gluing a scarf together.

Jason

Messages In This Thread

Scarf joint problem (1/4" x 3/16 strips)
Jason -- 4/4/2000, 10:00 am
Update
Jason -- 4/5/2000, 9:39 am
joint problems
Paul G. Jacobson -- 4/4/2000, 10:45 pm
Re: Scarf joint problem (1/4" x 3/16 strips)
Al Bratton -- 4/4/2000, 10:01 pm
Re: Scarf joint problem (1/4" x 3/16 strips)
Don Beale -- 4/4/2000, 4:16 pm
Re: Scarf joint problem (1/4" x 3/16 strips)
Bill Heuser -- 4/4/2000, 3:09 pm
cutting a scarf
Jason -- 4/4/2000, 3:52 pm
Bending Scarfs
mike allen ---} -- 4/4/2000, 1:55 pm
Re: Scarf joint problem (1/4" x 3/16 strips)
Dean Trexel -- 4/4/2000, 11:26 am
Re: Scarf joint problem (1/4" x 3/16 strips)
Jason -- 4/4/2000, 12:26 pm
Re: Scarf joint problem (1/4" x 3/16 strips)
Dean Trexel -- 4/4/2000, 12:48 pm
Re: Scarf joint problem (1/4" x 3/16 strips)
Jason -- 4/4/2000, 12:58 pm
Re: Scarf joint problem (1/4" x 3/16 strips)
Dean Trexel -- 4/4/2000, 2:49 pm
REDWOOD END-GRAIN
Jim McCool -- 4/4/2000, 12:37 pm
Re: Scarf joint problem (1/4" x 3/16 strips)
Chris Casazza -- 4/4/2000, 11:26 am
Re: Scarf joint problem (1/4" x 3/16 strips)
Hank -- 4/4/2000, 10:44 am
Re: Scarf joint problem (1/4" x 3/16 strips)
Jason -- 4/4/2000, 10:49 am
Re: Scarf joint problem (1/4" x 3/16 strips)
Ross Leidy -- 4/4/2000, 10:29 am