Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Scarf joint problem (1/4" x 3/16 strips)
By:Dean Trexel
Date: 4/4/2000, 2:49 pm
In Response To: Re: Scarf joint problem (1/4" x 3/16 strips) (Jason)

Aahh... for some reason I was thinking that you were going to put the pin in the end of the strips before joining them together, as an internal reinforcement...

> I was thinking of removing the pin once the glue is fully cured.

> Jason

Messages In This Thread

Scarf joint problem (1/4" x 3/16 strips)
Jason -- 4/4/2000, 10:00 am
Update
Jason -- 4/5/2000, 9:39 am
joint problems
Paul G. Jacobson -- 4/4/2000, 10:45 pm
Re: Scarf joint problem (1/4" x 3/16 strips)
Al Bratton -- 4/4/2000, 10:01 pm
Re: Scarf joint problem (1/4" x 3/16 strips)
Don Beale -- 4/4/2000, 4:16 pm
Re: Scarf joint problem (1/4" x 3/16 strips)
Bill Heuser -- 4/4/2000, 3:09 pm
cutting a scarf
Jason -- 4/4/2000, 3:52 pm
Bending Scarfs
mike allen ---} -- 4/4/2000, 1:55 pm
Re: Scarf joint problem (1/4" x 3/16 strips)
Dean Trexel -- 4/4/2000, 11:26 am
Re: Scarf joint problem (1/4" x 3/16 strips)
Jason -- 4/4/2000, 12:26 pm
Re: Scarf joint problem (1/4" x 3/16 strips)
Dean Trexel -- 4/4/2000, 12:48 pm
Re: Scarf joint problem (1/4" x 3/16 strips)
Jason -- 4/4/2000, 12:58 pm
Re: Scarf joint problem (1/4" x 3/16 strips)
Dean Trexel -- 4/4/2000, 2:49 pm
REDWOOD END-GRAIN
Jim McCool -- 4/4/2000, 12:37 pm
Re: Scarf joint problem (1/4" x 3/16 strips)
Chris Casazza -- 4/4/2000, 11:26 am
Re: Scarf joint problem (1/4" x 3/16 strips)
Hank -- 4/4/2000, 10:44 am
Re: Scarf joint problem (1/4" x 3/16 strips)
Jason -- 4/4/2000, 10:49 am
Re: Scarf joint problem (1/4" x 3/16 strips)
Ross Leidy -- 4/4/2000, 10:29 am