Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: About to Fiberglass a Stripper 1st time
By:Rob Macks
Date: 2/20/2001, 10:53 pm

: Hi,

: I have glassed the hull and it looks good. I made an error by wrapping some
: fiberglass around the bow. It was a mistake and when I scraped it I have
: gotten into the glass layer. I disturbed the finish over the second layer
: of glass and it is white in 4 places. I am not sure how to fix it. Should
: I just scrape it to clean up the white as best I can, or should I sand it
: off (not going through the seal coat)? I see how it is just as important
: to know what NOT to do is just as important as knowing what to do, ha, ha.

: Arthur

Sand the glass until the white spots dissapear but not though the seal coat to bare wood.

What boat are you building? If it's a North Star you can wrap the bow in glass again but it can be hard to do without air pockets. To solve this problem stretch and tape some clear kitchen plastic wrap over the wet glass to press it around the bow shape. Try to get as many wrinckles out of the plastic wrap as you can. Then fill the weave with several coats of resin.

I no longer try to wrap glass around the upper bow piece, just apply numerous coats of resin.

Good luck,
Rob

Messages In This Thread

About to Fiberglass a Stripper 1st time
Arthur -- 2/8/2001, 4:13 am
Re: About to Fiberglass a Stripper 1st time
Arthur -- 2/15/2001, 5:48 am
Stiff roller--good idea.
John Monfoe -- 2/16/2001, 4:37 am
Resin use
Paul G. Jacobson -- 2/16/2001, 3:53 am
Re: Resin use
Richard Boyle -- 2/16/2001, 8:21 am
Re: About to Fiberglass a Stripper 1st time
Jim Sailer -- 2/9/2001, 9:37 am
Re: About to Fiberglass a Stripper 1st time *Pic*
Rob Macks -- 2/8/2001, 11:23 am
Re: About to Fiberglass a Stripper 1st time
Arthur -- 2/20/2001, 7:32 pm
Re: About to Fiberglass a Stripper 1st time
Rob Macks -- 2/20/2001, 10:53 pm
Re: About to Fiberglass a Stripper 1st time
Arthur -- 2/9/2001, 3:06 am
Re: About to Fiberglass a Stripper 1st time
Rob Macks -- 2/9/2001, 12:05 pm
staples/no staples
Sam McFadden -- 2/10/2001, 1:53 pm
Re: Slight Disagreement . . .
Spidey -- 2/9/2001, 10:48 pm
What you want
Nick Schade - Guillemot Kayaks -- 2/10/2001, 10:32 am
Some points
mike allen -- 2/12/2001, 12:20 pm
Re: Internal Strongback
Nick Schade - Guillemot Kayaks -- 2/13/2001, 9:39 am
Internal Strongback confined releases
mike allen -- 2/13/2001, 12:13 pm
Re: Internal Strongback confined releases
Nick Schade - Guillemot Kayaks -- 2/14/2001, 9:22 am
Re: Internal Strongback confined releases
mike allen ---> -- 2/14/2001, 11:42 am
Re: What you want
Spidey -- 2/10/2001, 12:19 pm
Re: Well said!
Don Beale -- 2/10/2001, 11:00 am
Re: Slight Disagreement . . .
Rob Macks -- 2/10/2001, 12:08 am
Re: Slight Disagreement . . .
Richard Boyle -- 2/10/2001, 8:48 am
Re: Slight Disagreement . . .
Rob Macks -- 2/10/2001, 9:37 am
Re: Fell out of my chair laughing!
Spidey -- 2/10/2001, 12:45 am
Re: Slight Disagreement . . .
Rehd -- 2/10/2001, 12:24 am
Re: Might have to..........
Rehd -- 2/9/2001, 11:25 pm
Re: uneven seal coats
Nick Schade - Guillemot Kayaks -- 2/9/2001, 6:12 pm
Re: uneven seal coats
Al Gunther -- 2/10/2001, 11:49 am
Re: About to Fiberglass a Stripper 1st time
Arthur -- 2/9/2001, 2:49 pm
Re: About to Fiberglass a Stripper 1st time
Arthur -- 2/8/2001, 9:14 pm
Re: About to Fiberglass a Stripper 1st time
Dale Frolander -- 2/8/2001, 4:16 pm
Re: About to Fiberglass a Stripper 1st time
Ray Port Angeles -- 2/10/2001, 12:09 pm
Re: About to Fiberglass a Stripper 1st time
Les Corley -- 2/8/2001, 6:57 pm
Re: About to Fiberglass a Stripper 1st time
Rob Macks -- 2/8/2001, 7:20 pm
Just in time
Angela Watson -- 2/8/2001, 12:20 pm
Re: Just in time
Angela Watson -- 2/11/2001, 7:01 pm
Re: Just in time
Don Beale -- 2/8/2001, 7:12 pm
Re: Just in time
Angela Watson -- 2/8/2001, 9:13 pm
Re: Just in time
Don Beale -- 2/9/2001, 12:06 pm
Re:Keep the FOCUS..work is good..keys,wheres my ke *NM*
Ben Staley -- 2/9/2001, 12:58 pm
Re:And remember..
Don Beale -- 2/11/2001, 12:32 pm
Re: Just in time *Pic*
Bobby Curtis -- 2/8/2001, 1:34 pm
Re: Just in time
Angela Watson -- 2/8/2001, 7:04 pm
Re: Just in time
Angela Watson -- 2/8/2001, 7:12 pm
Re: Just in time
Bobby Curtis -- 2/8/2001, 7:41 pm
Re: Just in time
Geo. Cushing -- 2/8/2001, 12:59 pm
Re: Just in time
Angela Watson -- 2/8/2001, 6:56 pm
Re: Glassing time
Ben Staley -- 2/8/2001, 12:32 pm
Glassing
Russ -- 2/8/2001, 8:44 am