Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Just in time *Pic*
By:Bobby Curtis
Date: 2/8/2001, 1:34 pm
In Response To: Just in time (Angela Watson)

Angela

The first time I glassed a hull, I had no prior experience with fiberglass and epoxy. The instructions said to fill the weave of the cloth, and I did just that (or so I thought). The boat turned out OK, but it was heavy (50lbs). I later learned on other boats I built that filling the weave means being able to see the weave pattern (not the white of the cloth) in the epoxy even after three coats. I learned to squeegee off all excess epoxy until I could see the weave. On the first coat I squeegeed off the epoxy until I could just see the cloth begin to appear as white. I applied the subsequent coats just as the previous coat was tacky. For me, I found out that this worked best. I didn't have to sand between coats, but it required me to dedicate a couple of days to the task of applying three coats.

Bobby Curtis

Ps Are you going to fill the weave in the hallway of your gorgeous home?

Sea Spirit Kayaks

Messages In This Thread

About to Fiberglass a Stripper 1st time
Arthur -- 2/8/2001, 4:13 am
Re: About to Fiberglass a Stripper 1st time
Arthur -- 2/15/2001, 5:48 am
Stiff roller--good idea.
John Monfoe -- 2/16/2001, 4:37 am
Resin use
Paul G. Jacobson -- 2/16/2001, 3:53 am
Re: Resin use
Richard Boyle -- 2/16/2001, 8:21 am
Re: About to Fiberglass a Stripper 1st time
Jim Sailer -- 2/9/2001, 9:37 am
Re: About to Fiberglass a Stripper 1st time *Pic*
Rob Macks -- 2/8/2001, 11:23 am
Re: About to Fiberglass a Stripper 1st time
Arthur -- 2/20/2001, 7:32 pm
Re: About to Fiberglass a Stripper 1st time
Rob Macks -- 2/20/2001, 10:53 pm
Re: About to Fiberglass a Stripper 1st time
Arthur -- 2/9/2001, 3:06 am
Re: About to Fiberglass a Stripper 1st time
Rob Macks -- 2/9/2001, 12:05 pm
staples/no staples
Sam McFadden -- 2/10/2001, 1:53 pm
Re: Slight Disagreement . . .
Spidey -- 2/9/2001, 10:48 pm
What you want
Nick Schade - Guillemot Kayaks -- 2/10/2001, 10:32 am
Some points
mike allen -- 2/12/2001, 12:20 pm
Re: Internal Strongback
Nick Schade - Guillemot Kayaks -- 2/13/2001, 9:39 am
Internal Strongback confined releases
mike allen -- 2/13/2001, 12:13 pm
Re: Internal Strongback confined releases
Nick Schade - Guillemot Kayaks -- 2/14/2001, 9:22 am
Re: Internal Strongback confined releases
mike allen ---> -- 2/14/2001, 11:42 am
Re: What you want
Spidey -- 2/10/2001, 12:19 pm
Re: Well said!
Don Beale -- 2/10/2001, 11:00 am
Re: Slight Disagreement . . .
Rob Macks -- 2/10/2001, 12:08 am
Re: Slight Disagreement . . .
Richard Boyle -- 2/10/2001, 8:48 am
Re: Slight Disagreement . . .
Rob Macks -- 2/10/2001, 9:37 am
Re: Fell out of my chair laughing!
Spidey -- 2/10/2001, 12:45 am
Re: Slight Disagreement . . .
Rehd -- 2/10/2001, 12:24 am
Re: Might have to..........
Rehd -- 2/9/2001, 11:25 pm
Re: uneven seal coats
Nick Schade - Guillemot Kayaks -- 2/9/2001, 6:12 pm
Re: uneven seal coats
Al Gunther -- 2/10/2001, 11:49 am
Re: About to Fiberglass a Stripper 1st time
Arthur -- 2/9/2001, 2:49 pm
Re: About to Fiberglass a Stripper 1st time
Arthur -- 2/8/2001, 9:14 pm
Re: About to Fiberglass a Stripper 1st time
Dale Frolander -- 2/8/2001, 4:16 pm
Re: About to Fiberglass a Stripper 1st time
Ray Port Angeles -- 2/10/2001, 12:09 pm
Re: About to Fiberglass a Stripper 1st time
Les Corley -- 2/8/2001, 6:57 pm
Re: About to Fiberglass a Stripper 1st time
Rob Macks -- 2/8/2001, 7:20 pm
Just in time
Angela Watson -- 2/8/2001, 12:20 pm
Re: Just in time
Angela Watson -- 2/11/2001, 7:01 pm
Re: Just in time
Don Beale -- 2/8/2001, 7:12 pm
Re: Just in time
Angela Watson -- 2/8/2001, 9:13 pm
Re: Just in time
Don Beale -- 2/9/2001, 12:06 pm
Re:Keep the FOCUS..work is good..keys,wheres my ke *NM*
Ben Staley -- 2/9/2001, 12:58 pm
Re:And remember..
Don Beale -- 2/11/2001, 12:32 pm
Re: Just in time *Pic*
Bobby Curtis -- 2/8/2001, 1:34 pm
Re: Just in time
Angela Watson -- 2/8/2001, 7:04 pm
Re: Just in time
Angela Watson -- 2/8/2001, 7:12 pm
Re: Just in time
Bobby Curtis -- 2/8/2001, 7:41 pm
Re: Just in time
Geo. Cushing -- 2/8/2001, 12:59 pm
Re: Just in time
Angela Watson -- 2/8/2001, 6:56 pm
Re: Glassing time
Ben Staley -- 2/8/2001, 12:32 pm
Glassing
Russ -- 2/8/2001, 8:44 am