Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Been there done that.
By:David Hanson
Date: 12/7/2000, 1:53 pm
In Response To: Been there done that. (Dale Frolander)

I should have asked when in doubt, but I just plowed ahead. The fillet was pretty easy to fix turns out, however messy. Used a 1/2" drum sander and course paper with the dremel and a shop vac hose and brush nearby, also respirator and magnifying (2 1/2 power) glasses helped a bunch. Now on to the glassing probably this weekend sometime.

Messages In This Thread

Cockpit coaming
Ben Staley -- 12/5/2000, 12:32 pm
Re: Cockpit coaming
Eric Schade (shearwater boats) -- 12/6/2000, 7:01 pm
Re:How's the Baidarka coming?
Scott H. -- 12/7/2000, 7:37 am
Re: Cockpit coaming
Tony -- 12/5/2000, 5:27 pm
Re: Cockpit coaming
Nick Schade - Guillemot Kayaks -- 12/5/2000, 4:46 pm
Re: Cockpit coaming
Mike -- 12/5/2000, 5:40 pm
Re: Cockpit coaming
David Hanson -- 12/7/2000, 1:59 pm
Re: Cockpit coaming
Nick Schade - Guillemot Kayaks -- 12/6/2000, 8:39 am
Re: Cockpit coaming
Jack B. -- 12/5/2000, 4:02 pm
Just call me headache *Pic*
David Hanson -- 12/5/2000, 3:30 pm
Been there done that.
Dale Frolander -- 12/6/2000, 2:10 am
Re: Been there done that.
David Hanson -- 12/7/2000, 1:53 pm
Re: Just call me headache
Dean Trexel -- 12/5/2000, 7:39 pm
Re: Deepest sympathies
Ross Leidy -- 12/5/2000, 4:00 pm
Re: Just call me headache
Ben Staley -- 12/5/2000, 3:57 pm
Re: Cockpit coaming
Todd Fry -- 12/5/2000, 2:13 pm
Re: Cockpit coaming
Ross Leidy -- 12/5/2000, 1:32 pm