Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: two part polyurethane question
By:Bill Hamm
Date: 6/25/2011, 7:24 am

: Yes, I am really looking forward to that sanding job :)

: Ah well, it will wait. I will get the boat in the water after lunch
: today. I am just finishing up the skeg installation and deck
: lines now. Gradually, paddling pleasure is overtaking varnish
: disappointment.

: By the way, I got a response back from Interlux right away. They
: provided the standard line about sanding down the defective
: coats and scrub brushing with soapy water a couple times before
: wiping with their solvent. I sure don't understand the use of
: soap rather than say TSP or dish detergent. My instincts are
: that soap is much more likely to leave material on the surface.
: I wrote back and asked them about this; it will be interesting
: to see what they say.

: Meanwhile, back at the deck rigging,

: Best regards,

: Allan Edie

Oil is normally the problem and it doesn't take much to cause a problem. Need something that removes oil, a mild soap, like dishwashing soap disolves oil very well and is easy to rinse. How often do you have an oily taste on your dishes when eating? Scrub with a couple gallons of water with a few drops of dishwashing soap and a scotch brite pad, then follow with a clear water scrub using a new pad and you should be ready to go.

Bill H.

Messages In This Thread

Strip: two part polyurethane question
Al Edie -- 6/21/2011, 6:44 pm
Re: Strip: two part polyurethane question
Mike Bielski -- 6/22/2011, 10:22 am
Re: Strip: two part polyurethane question
Al Edie -- 6/22/2011, 10:50 am
Re: Strip: two part polyurethane question
Mike Bielski -- 6/22/2011, 11:00 am
Re: Strip: two part polyurethane question
Al Edie -- 6/22/2011, 6:53 pm
Re: Strip: two part polyurethane question
Al Edie -- 6/22/2011, 7:13 pm
Re: Strip: two part polyurethane question
Dan Caouette (CSFW) -- 6/22/2011, 4:21 pm
Re: Strip: two part polyurethane question
Al Edie -- 6/22/2011, 7:09 pm
Re: Strip: two part polyurethane question
Bill Hamm -- 6/22/2011, 7:35 pm
Re: Strip: two part polyurethane question
Dan Caouette (CSFW) -- 6/23/2011, 9:26 am
Re: Strip: two part polyurethane question
Bill Hamm -- 6/23/2011, 9:53 am
Re: Strip: two part polyurethane question
Al Edie -- 6/23/2011, 10:57 am
Re: Strip: two part polyurethane question
Bill Hamm -- 6/24/2011, 7:58 am
Re: Strip: two part polyurethane question
Al Edie -- 6/24/2011, 1:09 pm
Re: Strip: two part polyurethane question
Bill Hamm -- 6/25/2011, 7:19 am
Re: Strip: two part polyurethane question
Al Edie -- 6/23/2011, 10:13 am
Re: Strip: two part polyurethane question
Bill VerSteeg -- 6/27/2011, 10:55 am
Re: Strip: two part polyurethane question
Bill Hamm -- 6/28/2011, 2:56 am
Re: Strip: two part polyurethane question
Dan Caouette (CSFW) -- 6/23/2011, 9:40 am
Re: Strip: two part polyurethane question
Al Edie -- 6/23/2011, 11:09 am
Re: Strip: two part polyurethane question
Bryan Kapteyn -- 6/23/2011, 11:44 am
Re: Strip: two part polyurethane question
Al Edie -- 6/23/2011, 4:13 pm
Re: Strip: two part polyurethane question
Bryan Kapteyn -- 6/23/2011, 4:37 pm
Re: Strip: two part polyurethane question
Al Edie -- 6/24/2011, 1:17 pm
Re: Strip: two part polyurethane question
Bill Hamm -- 6/25/2011, 7:24 am
Re: Strip: two part polyurethane question
Bill Hamm -- 6/24/2011, 8:02 am
Re: Strip: two part polyurethane question
Kevin McAtee -- 6/28/2011, 2:59 pm
Re: Strip: two part polyurethane question
Al Edie -- 6/22/2011, 7:19 pm
Re: Strip: two part polyurethane question
Mike Bielski -- 6/24/2011, 12:22 am
update, last coat
Al Edie -- 6/23/2011, 1:19 pm
Re: update, last coat
Dave Houser -- 6/23/2011, 3:18 pm
Re: update, last coat
Al Edie -- 6/23/2011, 4:19 pm
Re: update, last coat
Bill Hamm -- 6/24/2011, 8:05 am