Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Tung oil finish?
By:Bill Hamm
Date: 10/24/2010, 12:27 am
In Response To: Re: Strip: Tung oil finish? (Mike Savage)

: I would have thought that Greenland paddles were oiled with seal
: fat if they were oiled at all. ;)

: Both tung and linseed oil will work on a paddle. Use what you have
: or what you can get.
: One thing between the two oils for me is that it is very easy for
: me to get pure linseed oil locally, pure tung oil is very
: difficult to find, bar having it shipped or special order, which
: increases the cost of it. Given my lack of problems with linseed
: oil, the extra cost and delay doesn't make tung oil really worth
: it.

: Mike Savage
: South West Cork

: There are arguments about whether linseed promotes mold growth. I
: haven't gotten any mold in the wood of my kayaks or paddle, all
: linseeded, but I paddle exclusively on salt water.

Hi Mike,

I havn't used linseed oil in a really long time, got away from it but don't really remember why. Around here salt water's kinda rare so mold might have been the issue.

Bill H.

Messages In This Thread

Strip: Tung oil finish?
Darel -- 10/22/2010, 11:03 am
Re: Strip: Tung oil finish?
Malcolm Schweizer -- 10/22/2010, 12:16 pm
Re: Strip: Tung oil finish?
Paul G. Jacobson -- 10/22/2010, 12:14 pm
Re: Strip: Tung oil finish?
Bill Hamm -- 10/23/2010, 1:32 am
Re: Strip: Tung oil finish?
Dave Gentry -- 10/23/2010, 9:11 am
Re: Strip: Tung oil finish?
Mike Savage -- 10/23/2010, 7:03 am
Re: Strip: Tung oil finish? *PIC*
Brad Widman -- 10/29/2010, 2:13 pm
Re: Strip: Tung oil finish?
Mike Savage -- 10/29/2010, 5:27 pm
Re: Strip: Tung oil finish?
Bill Hamm -- 10/24/2010, 12:27 am
Re: Strip: Tung oil finish?
Brian Nystrom -- 10/23/2010, 12:49 pm
Re: Strip: Tung oil finish?
Mark Seilis -- 10/22/2010, 11:24 am