Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Glassing Tip Needed
By:Doug K.
Date: 3/1/2001, 11:57 pm
In Response To: Re: Glassing Tip Needed (Rob Macks)

With more thought that sounds right, since the glass tends to float in the resin.
Vacuum bagging will provide the lightest weight layup but I feel it is more work than I want to do at this point.

Thank you! I will give it more consideration.

Doug

: YES

: I used to think so. But a couple years ago I was in Michigan at a boat
: builder's show sponsored by West Systems. Their tech guys claimed with two
: layers of glass MORE resin stayed in the cloth because the two layers were
: more sponge like and squeegeeing off excess resin was less effective.
: WHERE one layer squeegeed against a hard surface allowed more resin to be
: removed resulting in a lower weight lay-up. I do it this way now. Not much
: difference time wise, you have to apply fill coats anyway.

: It's less likely you have trapped air bubble problems applying one layer at a
: time. And it is easier for people new to glassing.

: Good enough reasons for me to use it and recommend it to others.

: Rob

Messages In This Thread

Glassing Tip Needed
Bill Dumont -- 2/28/2001, 12:22 pm
Re: Glassing Tip Needed
Doug Kuik -- 3/1/2001, 4:33 pm
Re: Glassing Tip Needed
Rob Macks -- 3/1/2001, 4:49 pm
Re: Glassing Tip Needed
Doug K. -- 3/1/2001, 11:57 pm
30' long baggies?
MikeWhy -- 3/2/2001, 7:28 am
Re: 30' long baggies?
bob -- 3/4/2001, 2:49 pm
Re: 30' long baggies?
Pete Rudie -- 3/3/2001, 1:35 pm
Re: 30' long baggies?
Sam McFadden -- 3/3/2001, 4:22 pm
Re: 30' long baggies?
Pete Rudie -- 3/4/2001, 2:56 am
Bagging (vacuum)
Sam McFadden -- 3/4/2001, 11:53 am
vacuum bagging kayaks & other stuff
Paul G. Jacobson -- 3/2/2001, 3:25 pm
Re: 30' long baggies?
john doerter -- 3/2/2001, 10:16 am
ROCKET SCIENCE
MikeWhy -- 3/2/2001, 11:36 am
Vacumebagging allow multi layers?
john doerter -- 3/2/2001, 11:18 pm
Re: 30' long baggies?
Rob Macks -- 3/2/2001, 8:13 am
Re: Glassing Tip Needed
Bill Dumont -- 3/1/2001, 9:26 pm
Re: Glassing Tip Needed
Rob Macks -- 2/28/2001, 9:01 pm
Re: I did both.
Tony -- 3/1/2001, 4:11 pm
Re: Glassing Tip Needed
Nick Schade - Guillemot Kayaks -- 3/1/2001, 10:05 am
Re: perhaps too emphatic?
Ross Leidy -- 2/28/2001, 11:50 pm
Re: perhaps too emphatic?
Rob Macks -- 3/1/2001, 8:01 am
Re: perhaps too emphatic?
Ross Leidy -- 3/1/2001, 8:58 am
Re: perhaps too Too emphatic?
Rob Macks -- 3/1/2001, 9:29 am
Re: perhaps too Too emphatic?
john doerter -- 3/1/2001, 9:20 pm
Re: agree to disagree?
Ross Leidy -- 3/1/2001, 4:51 pm
Re: agree to disagree?
Rob Macks -- 3/1/2001, 9:26 pm
Re: I yield...
Ross Leidy -- 3/1/2001, 10:55 pm
Re: Glassing Tip Needed
Ross Leidy -- 2/28/2001, 1:27 pm