Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Glassing Tip Needed
By:Bill Dumont
Date: 2/28/2001, 12:22 pm

Am getting ready to glass the hull of a panache. Want to put a second layer of glass below the waterline and an additional layer on the stem area.

After I put the first layer down, let it dry until leathery, was going to put the second layer down and put the second coat of epoxy over the whole hull without sanding.

Am assuming if I do this I'll need to let the epoxy completely dry in order to fair in the edges of second layer of fiberglass. I'll need to sand the whole hull before putting on the third coat of epoxy.

Any better way to do this?

Thanks, Bill

Messages In This Thread

Glassing Tip Needed
Bill Dumont -- 2/28/2001, 12:22 pm
Re: Glassing Tip Needed
Doug Kuik -- 3/1/2001, 4:33 pm
Re: Glassing Tip Needed
Rob Macks -- 3/1/2001, 4:49 pm
Re: Glassing Tip Needed
Doug K. -- 3/1/2001, 11:57 pm
30' long baggies?
MikeWhy -- 3/2/2001, 7:28 am
Re: 30' long baggies?
bob -- 3/4/2001, 2:49 pm
Re: 30' long baggies?
Pete Rudie -- 3/3/2001, 1:35 pm
Re: 30' long baggies?
Sam McFadden -- 3/3/2001, 4:22 pm
Re: 30' long baggies?
Pete Rudie -- 3/4/2001, 2:56 am
Bagging (vacuum)
Sam McFadden -- 3/4/2001, 11:53 am
vacuum bagging kayaks & other stuff
Paul G. Jacobson -- 3/2/2001, 3:25 pm
Re: 30' long baggies?
john doerter -- 3/2/2001, 10:16 am
ROCKET SCIENCE
MikeWhy -- 3/2/2001, 11:36 am
Vacumebagging allow multi layers?
john doerter -- 3/2/2001, 11:18 pm
Re: 30' long baggies?
Rob Macks -- 3/2/2001, 8:13 am
Re: Glassing Tip Needed
Bill Dumont -- 3/1/2001, 9:26 pm
Re: Glassing Tip Needed
Rob Macks -- 2/28/2001, 9:01 pm
Re: I did both.
Tony -- 3/1/2001, 4:11 pm
Re: Glassing Tip Needed
Nick Schade - Guillemot Kayaks -- 3/1/2001, 10:05 am
Re: perhaps too emphatic?
Ross Leidy -- 2/28/2001, 11:50 pm
Re: perhaps too emphatic?
Rob Macks -- 3/1/2001, 8:01 am
Re: perhaps too emphatic?
Ross Leidy -- 3/1/2001, 8:58 am
Re: perhaps too Too emphatic?
Rob Macks -- 3/1/2001, 9:29 am
Re: perhaps too Too emphatic?
john doerter -- 3/1/2001, 9:20 pm
Re: agree to disagree?
Ross Leidy -- 3/1/2001, 4:51 pm
Re: agree to disagree?
Rob Macks -- 3/1/2001, 9:26 pm
Re: I yield...
Ross Leidy -- 3/1/2001, 10:55 pm
Re: Glassing Tip Needed
Ross Leidy -- 2/28/2001, 1:27 pm