Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Why the discoloration???
By:Mike Hanks
Date: 1/25/2000, 10:50 pm
In Response To: Re: Bonding the glass to the wood (Mike)

> I should clarify the discoloration problem: Sunlight and exposure to air
> over time is what caused my discoloration problem. Best advice is to plan
> out the steps involved over a 72 hour period AND not take your hull out
> into the bright sunlight like I did prior to saturation of the panels.
> Butt blocks are still the way I am going on the next boat because it gives
> me the luxury of time. The wood can oxydize all it wants as long as it all
> stays the same color.

> Mike

Mike,

I had discoloration problems on the Arctic Tern and it was kept in my basement, on the dark side until after it was glassed. Why the discoloration???

Mike Hanks

Messages In This Thread

Advice on butt joints
Brian T. Cunningham -- 1/24/2000, 3:19 pm
How do you get them to butt up
Brian T. Cunningham -- 1/27/2000, 2:46 pm
Re: How do you get them to butt up
TomF -- 1/27/2000, 4:28 pm
Re: Advice on butt joints
Mike -- 1/24/2000, 10:23 pm
Re: Advice on butt joints
Steve Nieman -- 1/25/2000, 10:01 am
Re: Advice on butt joints
Gini -- 1/28/2000, 9:59 pm
Re: Advice on butt joints
Monte Rhodes -- 1/26/2000, 7:32 pm
Re: Bonding the glass to the wood
Mike Hanks -- 1/25/2000, 10:01 pm
Re: Bonding the glass to the wood
Mike -- 1/25/2000, 10:41 pm
Re: Why the discoloration???
Mike Hanks -- 1/25/2000, 10:50 pm
Re: Why the discoloration???
Mike -- 1/25/2000, 11:03 pm
Re: Advice on butt joints
Bobby Curtis -- 1/24/2000, 6:35 pm
Re: Advice on butt joints
Greg Hicks -- 1/24/2000, 3:37 pm