Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: No cloth
By:James
Date: 8/25/2012, 8:41 pm
In Response To: No cloth (Jay Babina)

: The first boat I built was a Cape Charles 17 (CLC) probably 20
: years ago?

: Anyhow, it called for no glass cloth other than taping the seams
: inside and out. You just epoxy coated the boat. My brother still
: has that boat and I use it every� now and then.
: Like most 1st timers you� tend to over build so it weighs around
: mid 40s. 3mm deck and 4 hull. My point is other than taping the
: seams, you really� don't need glass over the plywood.

: Later I built a S&G rolling kayak, same construction- very light
: maybe mid 30s. 3mm deck - 4 mm hull. On that one I just used 4
: oz glass cloth for the seams. A bent wood coaming will also cut
: down weight over a stacked plywood coaming.

Is it absolutely necessary to fiberglass the entire interior of a full-stripper? For my next build, I plan to 'glass the exterior with 4 oz, with bow & stern reinforcements. Can I get away with just coating the interior with epoxy? If not, can I get away with 2 oz. cloth on the interior?

Messages In This Thread

S&G: Ultralight construction
Raymond -- 8/16/2012, 10:59 am
Re: S&G: Ultralight construction
Paul G. Jacobson -- 8/16/2012, 11:51 am
No cloth
Jay Babina -- 8/16/2012, 3:48 pm
Ultralight
Raymond Pilot -- 8/17/2012, 2:26 pm
Re: Ultralight
ancient kayaker -- 8/17/2012, 6:17 pm
Re: Ultralight
Paul G. Jacobson -- 8/19/2012, 4:11 pm
Re: No cloth
James -- 8/25/2012, 8:41 pm
Re: No cloth *PIC*
ancient kayaker -- 8/25/2012, 9:39 pm
Re: No cloth
Bill Hamm -- 8/28/2012, 1:55 am
Re: No cloth *PIC*
Yostwerks -- 8/28/2012, 9:07 am
Re: No cloth
ancient kayaker -- 8/28/2012, 5:38 pm
Re: No cloth *PIC*
Yostwerks -- 8/29/2012, 9:07 am
Re: No cloth
ancient kayaker -- 8/29/2012, 9:44 am
Re: No cloth
Yostwerks -- 8/29/2012, 10:07 am
Re: No cloth
Bill Hamm -- 8/29/2012, 3:17 am
Re: No cloth
Yostwerks -- 8/29/2012, 9:21 am
Re: No cloth
Bill Hamm -- 8/28/2012, 1:57 am
Re: S&G: Ultralight construction
Stephen Troy -- 8/16/2012, 11:54 am
Re: S&G: Ultralight construction
John Abercrombie -- 8/16/2012, 12:06 pm
Re: S&G: Ultralight construction
dave g -- 8/16/2012, 10:17 pm
Re: S&G: Ultralight construction
Greg H -- 8/16/2012, 1:32 pm
Re: S&G: Ultralight construction
John Abercrombie -- 8/16/2012, 2:09 pm
Re: S&G: Ultralight construction *PIC*
Bryan k -- 8/16/2012, 2:52 pm
Re: S&G: Ultralight construction
Stephen Troy -- 8/16/2012, 3:48 pm
Re: S&G: Ultralight construction
Paul G. Jacobson -- 8/19/2012, 4:25 pm
Re: S&G: Ultralight construction
Stephen Troy -- 8/19/2012, 7:34 pm
Re: S&G: Ultralight construction
Bill Hamm -- 8/20/2012, 2:25 am
Re: S&G: Ultralight construction
ancient kayaker -- 8/20/2012, 2:59 pm
Re: S&G: Ultralight construction
John Abercrombie -- 8/20/2012, 8:55 pm
Re: S&G: Ultralight construction *PIC*
Jeff Horton -- 8/16/2012, 3:04 pm
Re: S&G: Ultralight construction
Kurt Maurer -- 8/16/2012, 8:29 pm
S-O-F time!
Rob Macks/Laughing Loon CC&K -- 8/16/2012, 3:58 pm
Re: S-O-F time!
Bill Hamm -- 8/20/2012, 2:28 am
Library :) *NM*
Rob Macks/Laughing Loon CC&K -- 8/20/2012, 7:25 am
3 new at $999 !
Bill Hamm -- 8/20/2012, 2:29 am
Re: S&G: Ultralight construction
ancient kayaker -- 8/16/2012, 4:19 pm
Re: S&G: Ultralight construction *PIC*
Marc Upchurch -- 8/16/2012, 6:22 pm
Re: S&G: Ultralight construction
Bill Hamm -- 8/20/2012, 2:30 am
Re: S&G: Ultralight construction *PIC*
Allan -- 8/16/2012, 11:01 pm
Re: S&G: Ultralight construction
Brian Nystrom -- 8/17/2012, 6:49 am
Re: S&G: Ultralight construction
Bill Hamm -- 8/20/2012, 2:21 am
Re: S&G: Ultralight construction
Alex Ferguson -- 8/22/2012, 5:09 am
Re: S&G: Ultralight construction
Yostwerks -- 8/28/2012, 9:31 am
Re: S&G: Ultralight construction
Alex Ferguson -- 8/28/2012, 6:15 pm
Re: S&G: Ultralight construction
Alex Ferguson -- 8/28/2012, 6:18 pm
Re: S&G: Ultralight construction
Niven Paine -- 8/28/2012, 10:01 pm