Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: S&G: Ultralight construction
By:Stephen Troy
Date: 8/19/2012, 7:34 pm
In Response To: Re: S&G: Ultralight construction (Paul G. Jacobson)

It's currently a strip-only design, as far as I know.

: Nice thing about a hybrid boat is that you are just doing a deck
: out of strips. Don't really need much in the way of plans. If a
: plywood (s&G) design calls for deck beams to support the plywood
: deck as it is being bent over the top of the hull, then just
: install those deck beams and lay your strips over them. You may
: want to make one or two more deck beams for spots in front of
: back of the ones in your plans--just to keep the strips from
: sagging. You can shape those by eye, or use a straight edge
: running between the existing deck beams to determine their
: shape.

: If the design you have does not have a curved deck, then make your
: own deck beams. i think a 60 " radius makes a nice curve,
: but draw a few circles to see what you need to get enough lift
: in the center to repel water and to fit your feet. Cut some
: patterns from cheap plywood or cardboard and drape them with an
: old bed sheet to get an idea of what the deck will look like, A
: few staples from a desktop stapler will hold the sheet in place,
: so you can climb in and check for foot room. Pull ALL the
: staples before you put the sheet back on the bed!

: When you have the shape you like, cut plywood supports and hot-glue
: them to your hull. Once the deck is stripped you can just hit
: them from the side to pop them free and scrape off any remaining
: glue.

: Just a thought

: PGJ

Messages In This Thread

S&G: Ultralight construction
Raymond -- 8/16/2012, 10:59 am
Re: S&G: Ultralight construction
Paul G. Jacobson -- 8/16/2012, 11:51 am
No cloth
Jay Babina -- 8/16/2012, 3:48 pm
Ultralight
Raymond Pilot -- 8/17/2012, 2:26 pm
Re: Ultralight
ancient kayaker -- 8/17/2012, 6:17 pm
Re: Ultralight
Paul G. Jacobson -- 8/19/2012, 4:11 pm
Re: No cloth
James -- 8/25/2012, 8:41 pm
Re: No cloth *PIC*
ancient kayaker -- 8/25/2012, 9:39 pm
Re: No cloth
Bill Hamm -- 8/28/2012, 1:55 am
Re: No cloth *PIC*
Yostwerks -- 8/28/2012, 9:07 am
Re: No cloth
ancient kayaker -- 8/28/2012, 5:38 pm
Re: No cloth *PIC*
Yostwerks -- 8/29/2012, 9:07 am
Re: No cloth
ancient kayaker -- 8/29/2012, 9:44 am
Re: No cloth
Yostwerks -- 8/29/2012, 10:07 am
Re: No cloth
Bill Hamm -- 8/29/2012, 3:17 am
Re: No cloth
Yostwerks -- 8/29/2012, 9:21 am
Re: No cloth
Bill Hamm -- 8/28/2012, 1:57 am
Re: S&G: Ultralight construction
Stephen Troy -- 8/16/2012, 11:54 am
Re: S&G: Ultralight construction
John Abercrombie -- 8/16/2012, 12:06 pm
Re: S&G: Ultralight construction
dave g -- 8/16/2012, 10:17 pm
Re: S&G: Ultralight construction
Greg H -- 8/16/2012, 1:32 pm
Re: S&G: Ultralight construction
John Abercrombie -- 8/16/2012, 2:09 pm
Re: S&G: Ultralight construction *PIC*
Bryan k -- 8/16/2012, 2:52 pm
Re: S&G: Ultralight construction
Stephen Troy -- 8/16/2012, 3:48 pm
Re: S&G: Ultralight construction
Paul G. Jacobson -- 8/19/2012, 4:25 pm
Re: S&G: Ultralight construction
Stephen Troy -- 8/19/2012, 7:34 pm
Re: S&G: Ultralight construction
Bill Hamm -- 8/20/2012, 2:25 am
Re: S&G: Ultralight construction
ancient kayaker -- 8/20/2012, 2:59 pm
Re: S&G: Ultralight construction
John Abercrombie -- 8/20/2012, 8:55 pm
Re: S&G: Ultralight construction *PIC*
Jeff Horton -- 8/16/2012, 3:04 pm
Re: S&G: Ultralight construction
Kurt Maurer -- 8/16/2012, 8:29 pm
S-O-F time!
Rob Macks/Laughing Loon CC&K -- 8/16/2012, 3:58 pm
Re: S-O-F time!
Bill Hamm -- 8/20/2012, 2:28 am
Library :) *NM*
Rob Macks/Laughing Loon CC&K -- 8/20/2012, 7:25 am
3 new at $999 !
Bill Hamm -- 8/20/2012, 2:29 am
Re: S&G: Ultralight construction
ancient kayaker -- 8/16/2012, 4:19 pm
Re: S&G: Ultralight construction *PIC*
Marc Upchurch -- 8/16/2012, 6:22 pm
Re: S&G: Ultralight construction
Bill Hamm -- 8/20/2012, 2:30 am
Re: S&G: Ultralight construction *PIC*
Allan -- 8/16/2012, 11:01 pm
Re: S&G: Ultralight construction
Brian Nystrom -- 8/17/2012, 6:49 am
Re: S&G: Ultralight construction
Bill Hamm -- 8/20/2012, 2:21 am
Re: S&G: Ultralight construction
Alex Ferguson -- 8/22/2012, 5:09 am
Re: S&G: Ultralight construction
Yostwerks -- 8/28/2012, 9:31 am
Re: S&G: Ultralight construction
Alex Ferguson -- 8/28/2012, 6:15 pm
Re: S&G: Ultralight construction
Alex Ferguson -- 8/28/2012, 6:18 pm
Re: S&G: Ultralight construction
Niven Paine -- 8/28/2012, 10:01 pm