Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: How much should I know about this stuff?
By:Stan Heeres
Date: 12/6/1998, 11:57 am
In Response To: How much should I know about this stuff? (Sean Martin)

Sean:

My boy and I are building the Chesapeake 16LT from plans and are having a blast.

If you have done what you have listed in your post you will have no problem. The people on this list are a very deep well of information on any subject, so do not be afraid of using them.

As to the sheer clamp and deck nailing problems noted in one response, we did the seer clamps as per instructions and had no problems. We deviated from the deck nailing and used drywall screws with a piece of wood to act as a clamp. They worked very well and will not show as we plan to paint with a 1" strip on the deck as shown in many photoes of CLC kayaks.

Go for it (you will save many $ going with the plans), enjoy it and ask for lots of help from this board.

Stan Heeres

Messages In This Thread

How much should I know about this stuff?
Sean Martin -- 12/5/1998, 10:50 pm
Well If I can build one in my living room :)
Brian T. Cunningham -- 12/8/1998, 10:47 am
Re: The hardest part is thinking about it
Nick Schade -- 12/8/1998, 9:49 am
One caveat
Paul Jacobson -- 12/9/1998, 5:32 am
Re: One caveat
Nick Schade -- 12/9/1998, 9:15 am
padio door
Brian T. Cunningham -- 12/9/1998, 12:52 pm
Re: styrofoam and dry ice
Nick Schade -- 12/10/1998, 9:00 am
picnic time
Brian T. Cunningham -- 12/11/1998, 11:24 am
The marvels of this list
Paul Jacobson -- 12/7/1998, 5:12 pm
Re: How much should I know about this stuff?
jim champoux -- 12/7/1998, 11:05 am
Re: How much should I know about this stuff?
Guy Wright -- 12/7/1998, 9:51 am
Re: How much should I know about this stuff?
Don Varnau -- 12/6/1998, 12:00 pm
Re: How much should I know about this stuff?
Stan Heeres -- 12/6/1998, 11:57 am
Re: How much should I know about this stuff?
Shawn Baker -- 12/6/1998, 10:42 am
Not much. Kayaks are quite simple.
Jon K. -- 12/5/1998, 11:35 pm