Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Staple gun
By:Mark Kanzler
Date: 6/25/1998, 11:38 am
In Response To: Re: Staple gun (NPenney)

It wouldn't be hard to design this feature. Just put a slot in the drive piece and insert different size pins in the slot to limit the drive piece's motion. Sorta like the revolver safety that blocks the hammer from hitting the firing pin.

> got what they claim is adjustable depth. It's targeted at electricians,
> claiming that you can adjust the gun so that it will staple wires
> against studs without crushing the wire. That could have some very
> nice implications for strip built boats if it works as advertised.

Messages In This Thread

Staple gun
Phillip Kearney -- 6/24/1998, 9:59 pm
Re: Staple gun
Ross Leidy -- 6/25/1998, 9:11 am
Re: Staple gun
Judy Kleindinst -- 6/25/1998, 11:58 am
Re: Staple gun
NPenney -- 6/25/1998, 6:55 am
Re: Staple gun
Mark Kanzler -- 6/25/1998, 11:38 am
Re: Staple gun
Mac Buhler -- 6/25/1998, 5:32 am
Re: Staple gun/straps
jim champoux -- 6/25/1998, 10:10 am
Re: ok...I know
jim champoux -- 6/25/1998, 10:27 am
Re: ok...I know
Mark Kanzler -- 6/25/1998, 11:27 am