Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Glass Kayak
By:John Monfoe
Date: 1/22/2001, 6:17 am
In Response To: Re: Glass Kayak (Victor lapostolle)

: Great idea!
: 4x8 sheets? heat bending over a mold? instead of butt or lap joints what
: about keyed joints with accent material that helps with rigidity or even
: ornate bolting apparatus? a gaskey around the top of the hull and the deck
: is battened down with screw dogs or some such...The beauty of lexan is its
: flexibility without stress induced loss of strength. What about UV? heat
: build up in your boat? man you gotta do this for all of us that went too
: far in the 70's good luck and keep us posted
: V

I agree you should try this. We may all be building see through boats. And how about us wood strippers cutting a lookdown hole in the bottom of our boats and putting in a clear pannel, like a hatch. When it gets scratched up we just repalce it with a new one. Post pictures if you can, as you go along.

John

Messages In This Thread

Glass Kayak
Johnnie -- 1/21/2001, 1:32 pm
Not suitable for scottish paddlers! :) *NM*
Marcelo -- 1/24/2001, 11:06 am
Re: Not Fiberglass Thank God!
George Cushing -- 1/23/2001, 2:33 pm
Re: Glass Kayak
Ken Brunton -- 1/23/2001, 2:30 pm
Re: Check this out, Lexan kayak from Innovex Corp
Grant Goltz -- 1/23/2001, 12:23 pm
Re: Glass Kayak
Johnnie -- 1/22/2001, 10:29 pm
Re: Glass Kayak
David Dick -- 1/23/2001, 6:57 am
Re: Glass Kayak
Don -- 1/22/2001, 10:16 pm
Re: Makes me wonder
Shawn Baker -- 1/23/2001, 10:44 am
Re: Makes me wonder
George Cushing -- 1/24/2001, 6:11 am
Re: Aren't Trees Amazing?
Shawn Baker -- 1/24/2001, 10:22 am
Re: Aren't Trees Amazing?
Grant Goltz -- 1/24/2001, 12:36 pm
Re: Aren't Trees Amazing?
Shawn Baker -- 1/24/2001, 12:55 pm
Re: Strip-deck C
Grant Goltz -- 1/25/2001, 12:49 pm
Re: Makes me wonder
Don -- 1/24/2001, 2:35 am
Re: Heat Treating Plastic
Shawn Baker -- 1/24/2001, 10:17 am
Re: Glass Kayak
John Schroeder -- 1/22/2001, 9:58 pm
Re: Polycarbonate *Pic*
Shawn Baker -- 1/22/2001, 11:29 am
Re: Polycarbonate
Lee -- 1/23/2001, 1:06 am
Re: Reading Material
Shawn Baker -- 1/23/2001, 10:31 am
Methyl Methacrylate
Pete Rudie -- 1/22/2001, 4:39 pm
Re: Help Pete!
George Cushing -- 1/23/2001, 3:00 pm
Re: Help Pete!
Pete Rudie -- 1/24/2001, 1:05 am
Re: Allright Smarty Pants!
George Cushing -- 1/23/2001, 2:56 pm
I wonder
mike allen -- 1/22/2001, 5:31 pm
Re: I wonder VACUUM FORMING
Eric Schade (shearwater boats) -- 1/22/2001, 7:30 pm
Re: I wonder VACUUM FORMING
John Monfoe -- 1/23/2001, 6:46 am
Re: Big Aluminum Billet
Spidey -- 1/23/2001, 1:31 am
Re: I wonder VACUUM FORMING
mike allen -- 1/22/2001, 8:06 pm
Re: Glass Kayak
Spidey -- 1/22/2001, 1:14 am
Re: Glass Kayak
Arlen -- 1/22/2001, 11:32 pm
Re: Thickness Shear Strength
Spidey -- 1/23/2001, 12:35 am
Re: Thickness Shear Strength
Ken Brunton -- 1/23/2001, 2:16 pm
Re: Glass Kayak
Victor lapostolle -- 1/22/2001, 1:54 am
Re: Glass Kayak
John Monfoe -- 1/22/2001, 6:17 am
Re: Both Glass Kayaks! :)
Spidey -- 1/23/2001, 12:16 am
Lexan Kayak
Paul G. Jacobson -- 1/21/2001, 11:33 pm
Re: lots of suntan lotions
Tony -- 1/22/2001, 6:48 pm
Re: Glass Kayak
daren -- 1/21/2001, 10:14 pm
Re: Glass Kayak
David Hanson -- 1/22/2001, 12:29 pm
Re: Glass Kayak
Jon -- 1/21/2001, 7:54 pm
Re: Glass Kayak
tom preska -- 1/21/2001, 9:38 pm
Re: Glass Kayak
Johnnie -- 1/21/2001, 10:13 pm
Re: Glass Kayak
David Dick -- 1/21/2001, 11:25 pm