Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Skin-on-Frame: skeg for CLC Arctic Hawk
By:Bill Hamm
Date: 10/15/2012, 12:50 am
In Response To: Re: Skin-on-Frame: skeg for CLC Arctic Hawk (ancient kayaker)

: Depends why it's needed. Some folk report that it tracks fine but
: weathercocks, probably due to the deep forefoot. A skeg may make
: it track like a locomotive: if agility in narrow waters is a
: issue you can make the skeg retractable or you can get the same
: effect with a little more area above the waterline at the bow
: (cheaper and less agonizing).

: We're supposed to be able to fix anything with enough epoxy -
: applied externally of course.

: As a a canoer I can only theorize about that . . .

Slight weathercocking is a good trait, just shift your butt a bit to windward and it'll track fine. Or use a real paddle (GP) and move your grip slightly to one side. No such thing as a completely neutral boat and if it tends to not weathercock then at times it can leecock which can be dangerous.

Bill H.

Messages In This Thread

Skin-on-Frame: skeg for CLC Arctic Hawk
JohnFaas -- 10/13/2012, 11:34 pm
Re: Skin-on-Frame: skeg for CLC Arctic Hawk
ancient kayaker -- 10/14/2012, 12:54 pm
Re: Skin-on-Frame: skeg for CLC Arctic Hawk
John Faas -- 10/14/2012, 4:26 pm
Re: Skin-on-Frame: skeg for CLC Arctic Hawk *PIC*
Sean Dawe -- 10/14/2012, 5:17 pm
Re: Skin-on-Frame: skeg for CLC Arctic Hawk
ancient kayaker -- 10/14/2012, 7:37 pm
Re: Skin-on-Frame: skeg for CLC Arctic Hawk
Bill Hamm -- 10/15/2012, 12:50 am
Re: Skin-on-Frame: skeg for CLC Arctic Hawk
John Messinger -- 10/15/2012, 8:33 am
Re: Skin-on-Frame: skeg for CLC Arctic Hawk
Jeff Horton -- 10/15/2012, 9:29 am
Re: Skin-on-Frame: skeg for CLC Arctic Hawk
Bill Hamm -- 10/16/2012, 1:41 am
Re: Skin-on-Frame: skeg for CLC Arctic Hawk
woodman -- 10/16/2012, 11:10 pm
Re: Skin-on-Frame: skeg for CLC Arctic Hawk
Bill Hamm -- 10/17/2012, 12:20 am
Re: Skin-on-Frame: skeg for CLC Arctic Hawk
SeanD -- 10/15/2012, 10:05 am