Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: S&G: I have a flat bottomed 12' S&G and...
By:Robert N Pruden
Date: 9/8/2012, 12:31 am
In Response To: Re: S&G: I have a flat bottomed 12' S&G and... (Etienne Muller)

: To me this sounds like a good excuse to start building another one
: from scratch.

: You may tell Linda that you have my permission.

Apparently you, Et, have no authority with her. I did as you suggested and all she had to say was, "Who is Et?" I tried to explain but she rolled her eyes and walked away. I think she is on to us. That said, I think I have a solution to my problem as old Ancient suggested. I'm gonna chop the corners off the sides and off part of the hull, thus narrowing the hull and the sheer panel, then shape them as nice as I can and install new panels which will add a little bit of tilt to the side of the hull and give me what I think I need. I'll have to pick up a few Guinness to ensure this project gets to completion before the snow flies.

Robert N Pruden

Messages In This Thread

S&G: I have a flat bottomed 12' S&G and...
Robert N Pruden -- 9/5/2012, 10:44 pm
Re: S&G: I have a flat bottomed 12' S&G and...
ancient kayaker -- 9/5/2012, 11:14 pm
Re: S&G: I have a flat bottomed 12' S&G and...
Bill Hamm -- 9/6/2012, 1:52 am
Re: S&G: I have a flat bottomed 12' S&G and...
Robert N Pruden -- 9/6/2012, 8:49 am
Re: S&G: I have a flat bottomed 12' S&G and...
John Abercrombie -- 9/6/2012, 11:27 am
Re: S&G: I have a flat bottomed 12' S&G and...
ancient kayaker -- 9/6/2012, 11:56 am
Re: S&G: I have a flat bottomed 12' S&G and...
Robert N Pruden -- 9/6/2012, 12:31 pm
Re: S&G: I have a flat bottomed 12' S&G and...
Malcolm Schweizer -- 9/6/2012, 12:57 pm
Re: S&G: I have a flat bottomed 12' S&G and...
Robert N Pruden -- 9/6/2012, 5:12 pm
Re: S&G: I have a flat bottomed 12' S&G and...
Bill Hamm -- 9/9/2012, 1:48 am
Re: S&G: I have a flat bottomed 12' S&G and...
mick allen -- 9/6/2012, 6:24 pm
Re: S&G: I have a flat bottomed 12' S&G and...
Etienne Muller -- 9/7/2012, 3:33 am
Re: S&G: I have a flat bottomed 12' S&G and...
Robert N Pruden -- 9/8/2012, 12:31 am
Re: S&G: I have a flat bottomed 12' S&G and...
ancient kayaker -- 9/8/2012, 11:57 am
Re: S&G: I have a flat bottomed 12' S&G and... *PIC*
Robert N Pruden -- 9/7/2012, 6:22 pm
Re: S&G: I have a flat bottomed 12' S&G and...
John Abercrombie -- 9/7/2012, 8:46 pm
Re: S&G: I have a flat bottomed 12' S&G and...
Robert N Pruden -- 9/7/2012, 9:25 pm
Re: S&G: I have a flat bottomed 12' S&G and...
Robert N Pruden -- 9/7/2012, 9:26 pm
Re: S&G: I have a flat bottomed 12' S&G and...
ancient kayaker -- 9/7/2012, 11:01 pm
Re: S&G: I have a flat bottomed 12' S&G and... *PIC*
Robert N Pruden -- 9/10/2012, 9:44 pm
Re: S&G: I have a flat bottomed 12' S&G and...
Kenneth Sutherland -- 9/11/2012, 12:03 am
Re: S&G: I have a flat bottomed 12' S&G and...
Bill Hamm -- 9/11/2012, 1:57 am
Re: S&G: I have a flat bottomed 12' S&G and...
Robert N Pruden -- 9/11/2012, 9:03 pm
Re: S&G: I have a flat bottomed 12' S&G and...
Kenneth Sutherland -- 9/14/2012, 11:25 pm
Re: S&G: I have a flat bottomed 12' S&G and...
Robert N Pruden -- 9/11/2012, 2:08 pm
Re: S&G: I have a flat bottomed 12' S&G and... *PIC*
Robert N Pruden -- 9/11/2012, 8:03 pm
Progress on the RP Sport surprises me *PIC*
Robert N Pruden -- 9/12/2012, 1:56 pm
Oh yeah...one more thought...
Robert N Pruden -- 9/12/2012, 2:00 pm
Re: S&G: I have a flat bottomed 12' S&G and... *PIC*
Robert N Pruden -- 9/12/2012, 3:34 pm
How do I know I am nutsy about building?
Robert N Pruden -- 9/13/2012, 5:37 pm
Joggle Stick for panel shape transfer *PIC*
Kenneth Sutherland -- 9/14/2012, 12:31 am
Re: Joggle Stick for panel shape transfer
Robert N Pruden -- 9/14/2012, 4:34 pm
Re: Joggle Stick for panel shape transfer
Robert N Pruden -- 9/18/2012, 5:26 pm
Re: Joggle Stick for panel shape transfer
John Messinger -- 9/25/2012, 8:23 am
Re: How do I know I am nutsy about building?
ancient kayaker -- 9/21/2012, 11:35 pm
Re: How do I know I am nutsy about building?
Bill Hamm -- 9/23/2012, 1:13 am
Re: How do I know I am nutsy about building?
Robert N Pruden -- 9/25/2012, 2:29 pm
Re: How do I know I am nutsy about building?
Bill Hamm -- 9/27/2012, 2:05 am
Re: How do I know I am nutsy about building?
ancient kayaker -- 9/26/2012, 5:49 pm
Re: How do I know I am nutsy about building?
Robert N Pruden -- 9/27/2012, 6:53 pm
Re: How do I know I am nutsy about building?
ancient kayaker -- 9/27/2012, 11:05 pm
Re: How do I know I am nutsy about building?
Robert N Pruden -- 9/27/2012, 11:13 pm
Re: How do I know I am nutsy about building?
Bryan K -- 10/17/2012, 4:28 pm
Re: How do I know I am nutsy about building?
Robert N Pruden -- 10/17/2012, 6:34 pm
Re: How do I know I am nutsy about building?
Paul Davies -- 10/17/2012, 7:41 pm
Andy Rooney Responds
John Messinger -- 10/17/2012, 8:16 pm
Re: Andy Rooney Responds
Etienne Muller -- 10/18/2012, 4:29 am
Re: Andy Rooney Responds
Robert N Pruden -- 10/26/2012, 5:09 pm
Re: Andy Rooney Responds
Bill Hamm -- 10/28/2012, 2:10 am
Re: How do I know I am nutsy about building?
Bill Hamm -- 9/28/2012, 12:47 pm
Re: How do I know I am nutsy about building?
Bill Hamm -- 9/28/2012, 12:46 pm
Some progress on the now not flat bottomed kayak *PIC*
Robert N Pruden -- 9/20/2012, 5:57 pm
Re: Some progress on the now not flat bottomed kay
Paul Davies -- 9/20/2012, 7:54 pm
Getting the ribs made and installed.. *PIC*
Robert N Pruden -- 9/21/2012, 11:33 am
Re: Getting the ribs made and installed.. *PIC*
woodman -- 9/21/2012, 1:30 pm
Re: Getting the ribs made and installed.. *PIC*
woodman -- 9/21/2012, 1:32 pm
Re: Getting the ribs made and installed..
Robert N Pruden -- 9/21/2012, 1:50 pm
Re: Getting the ribs made and installed..
Robert N Pruden -- 9/25/2012, 12:24 pm
Re: Some progress on the now not flat bottomed kay *PIC*
Robert N Pruden -- 9/21/2012, 3:28 pm
Re: Some progress on the now not flat bottomed kay *PIC*
Robert N Pruden -- 9/21/2012, 5:49 pm
Tracing a new panel completed... *PIC*
Robert N Pruden -- 9/24/2012, 10:56 am
New panel is glued together in situ *PIC*
Robert N Pruden -- 9/24/2012, 6:24 pm
Re: S&G: I have a flat bottomed 12' S&G and... *PIC*
Robert N Pruden -- 9/24/2012, 12:12 pm
Alrighty...new panel is shaped and installed... *PIC*
Robert N Pruden -- 9/24/2012, 5:00 pm
Re: Alrighty...new panel is shaped and installed..
scottbaxter -- 9/24/2012, 8:22 pm
Re: Alrighty...new panel is shaped and installed..
Robert N Pruden -- 9/25/2012, 12:18 pm
Re: Alrighty...new panel is shaped and installed..
Bill Hamm -- 9/27/2012, 1:59 am
Re: Alrighty...new panel is shaped and installed..
Paul Davies -- 9/24/2012, 8:37 pm
Re: Alrighty...new panel is shaped and installed..
Robert N Pruden -- 9/25/2012, 12:21 pm
Re: Alrighty...new panel is shaped and installed..
ancient kayaker -- 9/26/2012, 5:53 pm
Re: Alrighty...new panel is shaped and installed.. *PIC*
Sean Dawe -- 9/25/2012, 1:10 pm
Re: S&G: I have a flat bottomed 12' S&G and... *PIC*
Robert N Pruden -- 9/29/2012, 3:05 pm
Re: S&G: I have a flat bottomed 12' S&G and... *PIC*
Robert N Pruden -- 10/6/2012, 12:43 pm
Re: S&G: I have a flat bottomed 12' S&G and...
Robert N Pruden -- 10/6/2012, 1:35 pm
Re: S&G: I have a flat bottomed 12' S&G and...
ancient kayaker -- 10/7/2012, 1:30 pm
Re: S&G: I have a flat bottomed 12' S&G and...
Robert N Pruden -- 10/9/2012, 2:52 pm
Re: S&G: I have a flat bottomed 12' S&G and...
ancient kayaker -- 10/9/2012, 4:47 pm
Re: S&G: I have a flat bottomed 12' S&G and...
Robert N Pruden -- 10/10/2012, 9:41 am
So I get home Friday evening after...
Robert N Pruden -- 10/15/2012, 12:11 am
Re: S&G: I have a flat bottomed 12' S&G and... *PIC*
Robert N Pruden -- 10/28/2012, 4:38 pm
Snowing and cold outside but...
Robert N Pruden -- 10/28/2012, 5:25 pm
Grin And Bear Me....
Robert N Pruden -- 10/28/2012, 7:38 pm
Re: Grin And Bear Me....
Malcolm Schweizer -- 10/30/2012, 8:26 am
Re: Grin And Bear Me....
Robert N Pruden -- 10/30/2012, 7:11 pm
Re: Grin And Bear Me....
Robert N Pruden -- 10/30/2012, 7:29 pm
Brass rub strip is installed *PIC*
Robert N Pruden -- 10/30/2012, 11:08 pm
Riser and hatch supports installed tonight... *PIC*
Robert N Pruden -- 11/2/2012, 10:34 pm
Lots of stuff done today... *PIC*
Robert N Pruden -- 11/3/2012, 5:04 pm
Brass rub strip installed. *PIC*
Robert N Pruden -- 11/3/2012, 5:05 pm
Re: Brass rub strip installed. *PIC*
Robert N Pruden -- 11/3/2012, 5:07 pm
Seat hinges last thing to do today before launch *PIC*
Robert N Pruden -- 11/3/2012, 5:10 pm
Maiden launch completed *PIC*
Robert N Pruden -- 11/4/2012, 5:36 pm
Re: Maiden launch completed *PIC*
Robert N Pruden -- 11/4/2012, 5:38 pm
Re: Maiden launch completed *PIC*
Robert N Pruden -- 11/4/2012, 5:39 pm
Re: Maiden launch completed
Bill Hamm -- 11/5/2012, 12:15 am
Re: Maiden launch completed
Robert N Pruden -- 11/5/2012, 2:09 pm
'Bama won and it's a snow day here...
Robert N Pruden -- 11/7/2012, 10:33 am
Re: 'Bama won and it's a snow day here...
Kenneth Sutherland -- 11/7/2012, 11:07 pm
Re: 'Bama won and it's a snow day here...
Robert N Pruden -- 11/8/2012, 4:58 pm
Re: 'Bama won and it's a snow day here...
Etienne Muller -- 11/8/2012, 3:46 am
Re: 'Bama won and it's a snow day here...
Robert N Pruden -- 11/8/2012, 4:59 pm
Re: 'Bama won and it's a snow day here...
John Messinger -- 11/8/2012, 7:34 am
Re: 'Bama won and it's a snow day here...
Robert N Pruden -- 11/8/2012, 5:00 pm
Re: 'Bama won and it's a snow day here...
Paul Davies -- 11/8/2012, 12:08 pm
Re: 'Bama won and it's a snow day here... *PIC*
Sean Dawe -- 11/8/2012, 2:41 pm
Re: 'Bama won and it's a snow day here...
Paul Davies -- 11/8/2012, 4:31 pm
Re: 'Bama won and it's a snow day here...
Robert N Pruden -- 11/8/2012, 5:02 pm
Re: 'Bama won and it's a snow day here...
Paul Davies -- 11/8/2012, 7:57 pm