Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Maroskes finished
By:Etienne Muller
Date: 7/30/2012, 3:20 pm
In Response To: Re: Strip: Maroskes finished (Stephen Troy)

: Looks nice, but I'm confused. Did you drill those into the
: varnished deck?

No, I installed the fittings after the inside of the deck was glassed, but before the outside was glassed. I then glassed right over the holes, fill coats and all, sanded and varnished. Then I drilled out the glass covering the holes. If you want to see the process click on the link.

https://www.facebook.com/media/set/?set=a.294162110644609.70943.100001524683106&type=3&l=1da2a6f35a

Et

Messages In This Thread

Strip: Maroskes finished *PIC*
Etienne Muller -- 7/30/2012, 2:53 pm
Re: Strip: Maroskes finished *PIC*
Etienne Muller -- 7/30/2012, 2:54 pm
Re: Strip: Maroskes finished *PIC*
Etienne Muller -- 7/30/2012, 2:55 pm
Re: Strip: Maroskes finished
Stephen Troy -- 7/30/2012, 3:04 pm
Re: Strip: Maroskes finished
Etienne Muller -- 7/30/2012, 3:20 pm
Re: Strip: Maroskes finished
Robert l -- 7/30/2012, 6:47 pm
Re: Strip: Maroskes finished
Will Nettles -- 7/30/2012, 9:36 pm
Re: Strip: Maroskes finished *PIC*
Etienne Muller -- 7/31/2012, 4:20 am
Re: Strip: Maroskes finished
Will Nettles -- 7/31/2012, 12:57 pm
Re: Strip: Maroskes finished
Etienne Muller -- 7/31/2012, 3:53 pm
Re: Strip: Maroskes finished
Etienne Muller -- 7/31/2012, 3:55 pm
Re: Strip: Maroskes finished
John Messinger -- 7/31/2012, 8:31 am