Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Other: Please help me revive a boat
By:John Messinger
Date: 12/12/2011, 8:21 am
In Response To: Re: Other: Please help me revive a boat (Bryan Hansel)

: Pretty much all the advice you need is:

: 1. Remove the glass in the areas that are bad by sanding, pulling
: and knife.
: 2. Sand to good wood or replace rotten wood.
: 3. Sand the wood smooth and feather the glass.
: 4. Fiberglass the repair. Cut a piece of glass to fit the repair.
: Cut a piece of glass the extends one inch beyond the repair all
: around it. Epoxy away.
: 5. Varnish.

: There's a lot of detail that goes with this, but this gives you a
: good overview.

Getting into some of the details.

A.) i would not remove wood just because it is stained or a little soft. Most of the strength and toughness of a stripper built boat is derived from the layers of fiberglass-epoxy matrix. Hence, learn to live with the stained wood. It adds "character".

B.) I would move the boat into a dry, warm location and pull/cut all the loose fiberglass off. Then just let the wood dry out for several weeks. You might put a small fans inside the hull. The wood needs to be dry for the epoxy repairs to properly bond.

Messages In This Thread

Other: Please help me revive a boat *PIC*
louisd75 -- 12/12/2011, 12:19 am
Re: Other: Please help me revive a boat *PIC*
louisd75 -- 12/12/2011, 12:25 am
Re: Other: Please help me revive a boat *PIC*
louisd75 -- 12/12/2011, 12:30 am
Re: Other: Please help me revive a boat *PIC*
louisd75 -- 12/12/2011, 12:34 am
Re: Other: Please help me revive a boat *PIC*
louisd75 -- 12/12/2011, 12:39 am
Re: Other: Please help me revive a boat *PIC*
louisd75 -- 12/12/2011, 12:43 am
Re: Other: Please help me revive a boat *PIC*
louisd75 -- 12/12/2011, 12:51 am
Re: Other: Please help me revive a boat
Bryan Hansel -- 12/12/2011, 1:18 am
Re: Other: Please help me revive a boat
Etienne Muller -- 12/12/2011, 4:42 am
Re: Other: Please help me revive a boat
Brian Nystrom -- 12/12/2011, 7:12 am
Re: Other: Please help me revive a boat
Bill Hamm -- 12/13/2011, 4:45 am
Re: Other: Please help me revive a boat
Brian Nystrom -- 12/13/2011, 12:26 pm
Re: Other: Please help me revive a boat
Bill Hamm -- 12/14/2011, 2:32 am
Re: Other: Please help me revive a boat
Robert N Pruden -- 12/12/2011, 4:45 am
Re: Other: Please help me revive a boat
Eric Mattison -- 12/13/2011, 2:20 pm
Re: Other: Please help me revive a boat *NM*
Brian Nystrom -- 12/12/2011, 7:11 am
Re: Other: Please help me revive a boat
John Messinger -- 12/12/2011, 8:21 am
Re: Other: Please help me revive a boat
Bill Hamm -- 12/13/2011, 4:48 am
Re: Other: Please help me revive a boat
les cheeseman -- 12/14/2011, 11:50 am
Re: Other: Please help me revive a boat
Bill Hamm -- 12/15/2011, 2:55 am
Re: Other: Please help me revive a boat
John VanBuren -- 12/12/2011, 4:40 pm
Re: Other: Please help me revive a boat
Robert N Pruden -- 12/12/2011, 10:51 pm
Re: Other: Please help me revive a boat
Bill Hamm -- 12/13/2011, 4:50 am
Re: Other: Please help me revive a boat *PIC*
louisd75 -- 12/13/2011, 11:23 pm
Re: Other: Please help me revive a boat *PIC*
louisd75 -- 12/13/2011, 11:32 pm
Re: Other: Please help me revive a boat *PIC*
louisd75 -- 12/13/2011, 11:52 pm
Re: Other: Please help me revive a boat
robert l -- 3/18/2012, 8:03 pm
Re: Other: Please help me revive a boat *PIC*
louisd75 -- 12/13/2011, 11:49 pm
Re: Other: Please help me revive a boat
louisd75 -- 12/14/2011, 12:01 am
Re: Other: Please help me revive a boat
Bill Hamm -- 12/14/2011, 2:38 am
I'm Back!
louisd75 -- 3/17/2012, 6:20 pm
Re: I'm Back!
Charlie -- 3/17/2012, 7:57 pm
Re: I'm Back!
Bill Hamm -- 3/18/2012, 1:49 am
Re: I'm Back!
Etienne Muller -- 3/18/2012, 6:01 am
Re: I'm Back!
John Abercrombie -- 3/18/2012, 4:06 am