Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: I'm Back!
By:Etienne Muller
Date: 3/18/2012, 6:01 am
In Response To: Re: I'm Back! (Bill Hamm)

: Sheer clamps can certainly be used "if" the shape of the
: hull/deck allows it. Needs to be a fairly flat deck shape that
: meets the hull at a near right angle for it to work.

: Bill H.

Actually Bill, the method described should work with most, or all hull deck joins. If the sheer clamp is set into the forms as described (half width to the deck and half to the hull) and then glued to the deck while it is being built, the hull should fit snugly over the exposed half for glueing up.

If there is a bit of distortion one could always screw the hull to the sheer plank while it is setting up and then remove the screws, drill out the holes, and plug the holes with abalone or some nice contrasting timber.

For my next flat sided join I am going to try this.

Et

Messages In This Thread

Other: Please help me revive a boat *PIC*
louisd75 -- 12/12/2011, 12:19 am
Re: Other: Please help me revive a boat *PIC*
louisd75 -- 12/12/2011, 12:25 am
Re: Other: Please help me revive a boat *PIC*
louisd75 -- 12/12/2011, 12:30 am
Re: Other: Please help me revive a boat *PIC*
louisd75 -- 12/12/2011, 12:34 am
Re: Other: Please help me revive a boat *PIC*
louisd75 -- 12/12/2011, 12:39 am
Re: Other: Please help me revive a boat *PIC*
louisd75 -- 12/12/2011, 12:43 am
Re: Other: Please help me revive a boat *PIC*
louisd75 -- 12/12/2011, 12:51 am
Re: Other: Please help me revive a boat
Bryan Hansel -- 12/12/2011, 1:18 am
Re: Other: Please help me revive a boat
Etienne Muller -- 12/12/2011, 4:42 am
Re: Other: Please help me revive a boat
Brian Nystrom -- 12/12/2011, 7:12 am
Re: Other: Please help me revive a boat
Bill Hamm -- 12/13/2011, 4:45 am
Re: Other: Please help me revive a boat
Brian Nystrom -- 12/13/2011, 12:26 pm
Re: Other: Please help me revive a boat
Bill Hamm -- 12/14/2011, 2:32 am
Re: Other: Please help me revive a boat
Robert N Pruden -- 12/12/2011, 4:45 am
Re: Other: Please help me revive a boat
Eric Mattison -- 12/13/2011, 2:20 pm
Re: Other: Please help me revive a boat *NM*
Brian Nystrom -- 12/12/2011, 7:11 am
Re: Other: Please help me revive a boat
John Messinger -- 12/12/2011, 8:21 am
Re: Other: Please help me revive a boat
Bill Hamm -- 12/13/2011, 4:48 am
Re: Other: Please help me revive a boat
les cheeseman -- 12/14/2011, 11:50 am
Re: Other: Please help me revive a boat
Bill Hamm -- 12/15/2011, 2:55 am
Re: Other: Please help me revive a boat
John VanBuren -- 12/12/2011, 4:40 pm
Re: Other: Please help me revive a boat
Robert N Pruden -- 12/12/2011, 10:51 pm
Re: Other: Please help me revive a boat
Bill Hamm -- 12/13/2011, 4:50 am
Re: Other: Please help me revive a boat *PIC*
louisd75 -- 12/13/2011, 11:23 pm
Re: Other: Please help me revive a boat *PIC*
louisd75 -- 12/13/2011, 11:32 pm
Re: Other: Please help me revive a boat *PIC*
louisd75 -- 12/13/2011, 11:52 pm
Re: Other: Please help me revive a boat
robert l -- 3/18/2012, 8:03 pm
Re: Other: Please help me revive a boat *PIC*
louisd75 -- 12/13/2011, 11:49 pm
Re: Other: Please help me revive a boat
louisd75 -- 12/14/2011, 12:01 am
Re: Other: Please help me revive a boat
Bill Hamm -- 12/14/2011, 2:38 am
I'm Back!
louisd75 -- 3/17/2012, 6:20 pm
Re: I'm Back!
Charlie -- 3/17/2012, 7:57 pm
Re: I'm Back!
Bill Hamm -- 3/18/2012, 1:49 am
Re: I'm Back!
Etienne Muller -- 3/18/2012, 6:01 am
Re: I'm Back!
John Abercrombie -- 3/18/2012, 4:06 am