Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Skin-on-Frame: Offsets and stringers...
By:john raley
Date: 6/23/2011, 8:52 pm
In Response To: Re: Skin-on-Frame: Offsets and stringers... (QayaqGeek/Tavo)

: Good solution! I cannot tell you how many times I've
: measured/remeasured/re-remeasured those drawings on wood... Then
: I'll measure before cutting just to make sure.

The kicker is that i actually drafted them in CAD, printed them out full size, mounted them to the ply with spraymount, and still screwed it up...

John R

Messages In This Thread

Skin-on-Frame: Offsets and stringers...
QayaqGeek/Tavo -- 6/22/2011, 5:55 pm
Re: Skin-on-Frame: Offsets and stringers...
Bill Hamm -- 6/22/2011, 7:31 pm
Re: Skin-on-Frame: Offsets and stringers...
QayaqGeek/Tavo -- 6/23/2011, 6:41 am
Re: Skin-on-Frame: Offsets and stringers...
john raley -- 6/23/2011, 3:06 pm
Re: Skin-on-Frame: Offsets and stringers...
QayaqGeek/Tavo -- 6/23/2011, 8:25 pm
Re: Skin-on-Frame: Offsets and stringers...
john raley -- 6/23/2011, 8:52 pm
Re: Skin-on-Frame: Offsets and stringers...
Leonard Koscianski -- 6/27/2011, 1:19 pm
Re: Skin-on-Frame: Offsets and stringers...
Bob Johns -- 6/24/2011, 6:14 am
Re: Skin-on-Frame: Offsets and stringers...
Bill Hamm -- 6/24/2011, 7:47 am