Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Skin-on-Frame: Offsets and stringers...
By:QayaqGeek/Tavo
Date: 6/23/2011, 6:41 am
In Response To: Re: Skin-on-Frame: Offsets and stringers... (Bill Hamm)

: You mark out the hole for the opening in the middle of the boat
: after all the stringers are marked and there's at least 1"
: of frame between the insides of the stringers and the hole.

: Rough side is fine, no problem.

: Bill H.

Thank you Bill!

Messages In This Thread

Skin-on-Frame: Offsets and stringers...
QayaqGeek/Tavo -- 6/22/2011, 5:55 pm
Re: Skin-on-Frame: Offsets and stringers...
Bill Hamm -- 6/22/2011, 7:31 pm
Re: Skin-on-Frame: Offsets and stringers...
QayaqGeek/Tavo -- 6/23/2011, 6:41 am
Re: Skin-on-Frame: Offsets and stringers...
john raley -- 6/23/2011, 3:06 pm
Re: Skin-on-Frame: Offsets and stringers...
QayaqGeek/Tavo -- 6/23/2011, 8:25 pm
Re: Skin-on-Frame: Offsets and stringers...
john raley -- 6/23/2011, 8:52 pm
Re: Skin-on-Frame: Offsets and stringers...
Leonard Koscianski -- 6/27/2011, 1:19 pm
Re: Skin-on-Frame: Offsets and stringers...
Bob Johns -- 6/24/2011, 6:14 am
Re: Skin-on-Frame: Offsets and stringers...
Bill Hamm -- 6/24/2011, 7:47 am