Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Wetted-out Skin coating
By:Kudzu
Date: 3/12/2011, 11:20 pm
In Response To: Wetted-out Skin coating (Paul G. Jacobson)

I use oil based now. I tried a latex and was not impressed. It looks great but it is not durable! So I will not be using it again unless someone asks for it.

I use polyester skins and oil based paint, I thin the first coat so it soaks in better just for looks. I hate when the inside of the boat looks blotchy. By thinning the first coat I get a more even color inside the boat and it just looks better.

What you are suggesting is interesting and I will have to try that with some scrap. I am building a new one right now and once I get it skinned I may try that before I paint and see what happens. I think the pin holes come from just being able to apply an even coat. I believe the pin holes are in spots that the paint is put on a little thinner. So I just do three coats and that seems to work just fine. But at one coat every 24 hours it takes 6 days to apply the finish.

Messages In This Thread

Skin-on-Frame: New Skin coating *PIC*
Dave Gentry -- 10/31/2010, 11:33 am
Re: Skin-on-Frame: New Skin coating
Tim Abbott -- 3/11/2011, 5:37 pm
Re: Skin-on-Frame: New Skin coating
TheLuckyOne -- 3/12/2011, 8:54 pm
Re: Skin-on-Frame: New Skin coating
Bill Hamm -- 3/13/2011, 12:36 am
workbench top of MDF?
Paul G. Jacobson -- 3/13/2011, 1:03 am
Re: workbench top of MDF?
Bill Hamm -- 3/14/2011, 12:15 am
Re: Skin-on-Frame: New Skin coating
Dave Gentry -- 3/12/2011, 10:45 pm
Re: Skin-on-Frame: New Skin coating
TheLuckyOne -- 3/13/2011, 10:30 am
Re: Skin-on-Frame: New Skin coating
Paul G. Jacobson -- 3/13/2011, 1:21 am
Re: Skin-on-Frame: New Skin coating
Tim Abbott -- 3/13/2011, 11:00 am
Re: Skin-on-Frame: New Skin coating
Dave Gentry -- 3/11/2011, 7:07 pm
Re: Skin-on-Frame: New Skin coating
Mike Bielski -- 3/11/2011, 10:46 pm
Re: Skin-on-Frame: New Skin coating
Bill Hamm -- 3/12/2011, 8:24 am
Re: Skin-on-Frame: New Skin coating
Mike Bielski -- 3/12/2011, 9:10 am
Re: Skin-on-Frame: New Skin coating
Bill Hamm -- 3/12/2011, 9:32 am
Re: Skin-on-Frame: New Skin coating
Tim Abbott -- 3/12/2011, 9:55 am
Re: Skin-on-Frame: New Skin coating
Bill Hamm -- 3/12/2011, 10:12 am
Re: Skin-on-Frame: New Skin coating *PIC*
Tim Abbott -- 3/12/2011, 8:46 am
Re: Skin-on-Frame: New Skin coating
Bill Hamm -- 3/12/2011, 9:33 am
Re: Skin-on-Frame: New Skin coating
Tim Abbott -- 3/11/2011, 10:00 pm
Re: Skin-on-Frame: New Skin coating
Kudzu -- 3/12/2011, 7:39 am
Wetted-out Skin coating
Paul G. Jacobson -- 3/12/2011, 11:11 am
Re: Wetted-out Skin coating
Kudzu -- 3/12/2011, 11:20 pm
Re: Skin-on-Frame: New Skin coating
Dave Gentry -- 3/11/2011, 10:48 pm
Re: Skin-on-Frame: New Skin coating
Tim Abbott -- 3/11/2011, 11:10 pm
Re: Skin-on-Frame: New Skin coating
John VanBuren -- 11/7/2010, 7:36 am
Re: Skin-on-Frame: New Skin coating
Bill Hamm -- 11/7/2010, 1:37 am
Re: Skin-on-Frame: New Skin coating
Noel Bennett -- 11/3/2010, 3:25 pm
Re: Skin-on-Frame: New Skin coating
Kudzu -- 11/3/2010, 3:42 pm
Re: Skin-on-Frame: New Skin coating
Noel Bennett -- 11/3/2010, 4:13 pm
Re: Skin-on-Frame: New Skin coating
Prasad Bhatla -- 11/6/2010, 6:39 pm
Re: Skin-on-Frame: New Skin coating
Noel Bennett -- 11/7/2010, 1:11 pm
Re: Skin-on-Frame: New Skin coating
Dave Gentry -- 11/2/2010, 3:11 pm
Re: Skin-on-Frame: New Skin coating
Noel Bennett -- 11/2/2010, 4:59 pm
Re: Skin-on-Frame: New Skin coating
Dave Gentry -- 11/2/2010, 7:04 pm
Re: Skin-on-Frame: New Skin coating
Will Clarke -- 11/3/2010, 10:09 pm
Re: Skin-on-Frame: New Skin coating
Noel Bennett -- 11/2/2010, 7:53 pm
Re: Skin-on-Frame: New Skin coating
John lasky -- 11/2/2010, 11:23 am
Re: Skin-on-Frame: New Skin coating
Will Clarke -- 11/1/2010, 12:32 am
Re: Skin-on-Frame: New Skin coating
Ken Blanton -- 10/31/2010, 6:48 pm
Re: Skin-on-Frame: New Skin coating
Kudzu -- 10/31/2010, 4:29 pm
Re: Skin-on-Frame: New Skin coating
Dave Gentry -- 10/31/2010, 5:28 pm
Re: Skin-on-Frame: New Skin coating
Noel Bennett -- 10/31/2010, 4:26 pm