Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Heating work area for fiberglassing
By:Bill Hamm
Date: 11/17/2010, 7:48 am
In Response To: Re: Strip: Heating work area for fiberglassing (Stephen Troy)

: Heh. I expect outdoor temp to be constantly around 0 deg Fahrenheit
: during the time I work (evenings) for 3-4 weeks of the project.
: So if I can work in 40 degrees in a garage, I'll be pretty
: happy.

: I worried more about temp variations using space heaters since I
: hear about how relative temp differences around the hull can
: cause blush or bubbles or explosions or radioactivity.

Um....3 to 4 weeks? Well you're at least optomistic :)

Actually the heaters I was thinking of look much like built in baseboard heaters but are portable, somewhat more expensive than the cheap heaters you normally find, they'll also keep a small room fairly comfortable and will regulate the heat pretty well. I've had two times I've used these heaters to heat smallish garage like structures and both times they would easily maintain normal room temperatures. But you have to not set them back much when you're not there, it takes a really long time to warm the space the first time, much easier to maintain the temperature.

Bill H.

Messages In This Thread

Strip: Heating work area for fiberglassing
Stephen Troy -- 11/16/2010, 11:12 am
Re: Strip: Heating work area for fiberglassing
Paul G.Jacobson -- 11/28/2010, 3:32 am
Re: Strip: Heating work area for fiberglassing
Mark Rakestraw -- 11/16/2010, 1:19 pm
Re: Strip: Heating work area for fiberglassing
Stephen Troy -- 11/17/2010, 1:47 am
Re: Strip: Heating work area for fiberglassing
Bill Hamm -- 11/17/2010, 7:48 am
Re: Strip: Heating work area for fiberglassing
Stephen Troy -- 11/17/2010, 1:03 pm
Re: Strip: Heating work area for fiberglassing
Mark -- 11/18/2010, 12:01 pm
Re: Strip: Heating work area for fiberglassing
Bill Hamm -- 11/18/2010, 1:26 am
Re: Strip: Heating work area for fiberglassing
Al Edie -- 11/18/2010, 12:21 pm
Re: Strip: Heating work area for fiberglassing
Bill Hamm -- 11/19/2010, 12:49 am
Re: Strip: Heating work area for fiberglassing
PatrickC -- 11/21/2010, 5:59 pm
Re: Strip: Heating work area for fiberglassing
Bill Hamm -- 11/22/2010, 12:40 am
Re: Strip: Heating work area for fiberglassing
Bill Hamm -- 11/22/2010, 12:42 am
Re: Strip: Heating work area for fiberglassing
Bill Hamm -- 11/18/2010, 1:36 pm
Re: Strip: Heating work area for fiberglassing
Pat MacDonald -- 11/17/2010, 8:58 am
Re: Strip: Heating work area for fiberglassing
Dan Caouette (CSFW) -- 11/17/2010, 9:17 am
Re: Strip: Heating work area for fiberglassing
Ancient Kayaker -- 11/20/2010, 11:57 am
Re: Strip: Heating work area for fiberglassing *PIC*
Farback -- 11/20/2010, 12:45 pm
Re: Strip: Heating work area for fiberglassing
Les Cheeseman -- 11/17/2010, 10:28 am
Re: Strip: Heating work area for fiberglassing
Mike Savage -- 11/17/2010, 5:05 pm
Re: Strip: Heating work area for fiberglassing
Bill Hamm -- 11/17/2010, 9:05 am
Re: Strip: Heating work area for fiberglassing
Kurt Maurer -- 11/16/2010, 6:17 pm
Re: Strip: Heating work area for fiberglassing
Darel -- 11/16/2010, 8:29 pm
Re: Strip: Heating work area for fiberglassing
Bill Hamm -- 11/16/2010, 8:41 pm
Re: Strip: Heating work area for fiberglassing
Bill Hamm -- 11/16/2010, 12:08 pm
Re: Strip: Heating work area for fiberglassing
Stephen Troy -- 11/16/2010, 12:20 pm