Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

S&G: Old tortured ply measurements uploaded *PIC*
By:Etienne Muller
Date: 9/1/2010, 4:41 pm

Hi folks

I've been absent from the forum for a while. Too busy building my new shed. Lots happening though I see.

Some of you may be interested, so I thought I should mention that I found some photos of the old 14 ft tortured ply design that I took from a book many years ago and posted them on my site.

All the info needed is there to build the boat which is just a week or 10 day project for most of you guys.

The design is actually quite effective for anyone up to about 160 lbs. The waterline is full length and rough water handling is good.

Generally a great boat for small women and teenagers. It is also very lightweight and very cheap to build.

The book it came out of is ancient (± 35 years old) and I am sure it is out of print. I can't remember the author or the name of the design. However strictly speaking I am infringing copyright, though I doubt anyone cares after all this time, so if anyone is interested it is probably a good idea to download the photos in case I have to remove them from the site. The design is royalty free as I recall.

A note on design variations: I once stretched the design (length only) to 15 ft and installed an ocean cockpit and it worked out really well. A rear bulkhead with a plastic hatch in it would be a good addition too. I also reduced the radius on the rear deck on these boats to make ocean cockpits more usable.

http://etiennemuller.com/TorturedPlyPlans/index.htm

Next post is another image

Messages In This Thread

S&G: Old tortured ply measurements uploaded *PIC*
Etienne Muller -- 9/1/2010, 4:41 pm
Re: S&G: Old tortured ply measurements uploaded
Brian Scarborough -- 9/2/2010, 8:54 pm
Re: S&G: Old tortured ply measurements uploaded *PIC*
Etienne Muller -- 9/3/2010, 4:32 pm
more harshly interrogated plywood *PIC*
Will Clarke -- 9/3/2010, 8:21 pm
Re: more harshly interrogated plywood
Bill Hamm -- 9/4/2010, 12:57 am
Re: more harshly interrogated plywood *NM* *PIC*
Will Clarke -- 9/3/2010, 8:22 pm
Re: S&G: Old tortured ply measurements uploaded
Bill Hamm -- 9/3/2010, 5:21 pm
Re: S&G: Old tortured ply measurements uploaded
Alex Ferguson -- 9/4/2010, 11:37 pm
Re: S&G: Old tortured ply measurements uploaded
Niven Paine -- 9/5/2010, 3:59 am
Re: S&G: Old tortured ply measurements uploaded
Bill Hamm -- 9/5/2010, 12:44 am
Semi-tortured ply option
Brian Nystrom -- 9/2/2010, 12:33 pm
Re: Semi-tortured ply option
Bill Hamm -- 9/3/2010, 12:46 am
Re: Semi-tortured ply option
Alex Ferguson -- 9/2/2010, 6:16 pm
Re: Semi-tortured ply option
Brian Nystrom -- 9/3/2010, 10:40 am
Re: Semi-tortured ply option
Alex Ferguson -- 9/4/2010, 11:29 pm
Re: Semi-tortured ply option
Bill Hamm -- 9/5/2010, 12:40 am
Re: Semi-tortured ply option
Bill Hamm -- 9/3/2010, 12:50 am
Re: Semi-tortured ply option
Charlie -- 9/2/2010, 1:46 pm
Re: S&G: Old tortured ply measurements uploaded
Alex Ferguson -- 9/2/2010, 4:46 am
Re: S&G: Old tortured ply measurements uploaded
Charlie -- 9/2/2010, 1:39 pm
Re: S&G: Old tortured ply measurements uploaded *PIC*
Etienne Muller -- 9/1/2010, 4:42 pm
Re: S&G: Old tortured ply measurements uploaded
Bill Hamm -- 9/2/2010, 2:04 am