Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: finishing method
By:Bill Hamm
Date: 3/26/2009, 6:14 pm
In Response To: Re: Epoxy: finishing method (Simeon)

: It definitely works. R/C airplane builders have been using a similar
: technique to build composite wings for quite some time, and with the
: addition of vacuum bagging, the results can be both spectacular and light.

: I will be investigating some thin PVC film which is able to be stretched in
: order to achieve a similar result on my strip boat.

Yeah pretty much figured the stuff in the article would be limited to S&G with it's flat surfaces.

Bill H.

Messages In This Thread

Epoxy: finishing method
Bill Hamm -- 3/26/2009, 1:43 am
Re: Epoxy: finishing method
Simeon -- 3/26/2009, 5:32 pm
Re: Epoxy: finishing method
Bill Hamm -- 3/26/2009, 6:14 pm
Re: Epoxy: finishing method
PatrickC -- 3/26/2009, 8:53 pm
Re: Epoxy: finishing method
Bill Hamm -- 3/27/2009, 8:47 am
Re: Epoxy: finishing method
Pawistik -- 3/27/2009, 10:57 am
Re: Epoxy: finishing method
Bill Hamm -- 3/27/2009, 4:25 pm
Re: Epoxy: finishing method
Dave Houser -- 3/27/2009, 2:53 pm
Re: Epoxy: finishing method *NM*
Dave Houser -- 3/27/2009, 2:52 pm
Re: Epoxy: finishing method *LINK*
Mike Bielski -- 3/26/2009, 10:47 am
Re: Epoxy: finishing method
John F Monroe -- 3/26/2009, 4:43 am
Re: Epoxy: finishing method *LINK* *Pic*
Armin Wendt -- 3/26/2009, 2:12 am
Re: Epoxy: finishing method
Bill Hamm -- 3/26/2009, 2:57 am
Re: Epoxy: finishing method
Bill Hamm -- 3/26/2009, 2:51 am