Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: finishing method
By:Bill Hamm
Date: 3/26/2009, 2:57 am
In Response To: Re: Epoxy: finishing method *LINK* *Pic* (Armin Wendt)

: I'm game to try it! I've used this process on a very small scale to join
: plywood panels together. The mylar sheets were used to keep the panels
: from sticking to the work area. Once the epoxy cured and the clamps taken
: off it left a super finish! Now, to find some rolls of mylar film!

Btw, this also brings up the idea I've had over the years of using one of the manufactured films as a tough cover for a SOF. I know lexan is available as a film and is amazingly tough and weighs nearly nothing.

Bill H.

Messages In This Thread

Epoxy: finishing method
Bill Hamm -- 3/26/2009, 1:43 am
Re: Epoxy: finishing method
Simeon -- 3/26/2009, 5:32 pm
Re: Epoxy: finishing method
Bill Hamm -- 3/26/2009, 6:14 pm
Re: Epoxy: finishing method
PatrickC -- 3/26/2009, 8:53 pm
Re: Epoxy: finishing method
Bill Hamm -- 3/27/2009, 8:47 am
Re: Epoxy: finishing method
Pawistik -- 3/27/2009, 10:57 am
Re: Epoxy: finishing method
Bill Hamm -- 3/27/2009, 4:25 pm
Re: Epoxy: finishing method
Dave Houser -- 3/27/2009, 2:53 pm
Re: Epoxy: finishing method *NM*
Dave Houser -- 3/27/2009, 2:52 pm
Re: Epoxy: finishing method *LINK*
Mike Bielski -- 3/26/2009, 10:47 am
Re: Epoxy: finishing method
John F Monroe -- 3/26/2009, 4:43 am
Re: Epoxy: finishing method *LINK* *Pic*
Armin Wendt -- 3/26/2009, 2:12 am
Re: Epoxy: finishing method
Bill Hamm -- 3/26/2009, 2:57 am
Re: Epoxy: finishing method
Bill Hamm -- 3/26/2009, 2:51 am