: Hey thanks Rehd. What an outstanding delivery! Looks like you guys had a fun
: field trip What are the little brushes and white cones for?

: http://www.nwlink.com/~chips/cedarstrip/images/Pick-nic_Bottle.jpg
: http://www.nwlink.com/~chips/cedarstrip/images/Syringe1.jpg
: http://www.nwlink.com/~chips/cedarstrip/images/Syringe-top_fit.jpg
: http://www.nwlink.com/~chips/cedarstrip/images/The_Draw.jpg
: http://www.nwlink.com/~chips/cedarstrip/images/the_parts.jpg

Thanks Chip, appreciate the assistance and use of your space.
The white brushes come with the kit I purchase and I assume they are to wash out the syringes, which is still a good idea with the epoxy use.
The white cones, while I'm not sure of the original intention, work if you can't find the bottles with cone tops. If you can find bottles with flat lids, you cut holes in the top about 3/8" to 1/2" diameter and the cones will fit down in them until they squeeze into a tight fit and they have the holes through them to support the syringe. So, you can go two ways with this set up.

Again, Thanks to Chip for the use of his site for these pictures.

Hope this helps folks looking for a good clean, economical method of mixing small batches of epoxy with as little waste as possible.

Rehd