Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

a couple?
By:Dan Ruff
Date: 11/1/2001, 5:00 pm
In Response To: Re: This is a drawknife (Patsy)

: I checked out Ebay and am bidding on a couple.

Bidding on a couple, eh? Well if you win more than one of the auctions, you can send the extra one to me if you want. I played around with my dad's drawknife a lot, but haven't gotten around to buying one for myself.

Seriously though, if you win an Ebay auction, you will probably be buying a dull drawknife, so you will need to sharpen it. If you have sharpening stones, then you are set already. If not, I wouldn't recommend buying stones. They can get pretty expensive after you buy all the various grits, and you can get good results by using progresivley finer grits of sandpaper. Here is a link to a silly site that describes sharpening with sandpaper the "scary sharp" way. It works.

http://www2.fwi.com/~krumy/scary/copyof.htm

The trick with a drawknife is that you need to bring the paper to the knife instead of the knife to the paper. That's because the handles get in the way. I've heard of people using sanding drums chucked into a handheld drill. You could also wrap sandpaper around a block of wood. That would probably be good enough. The super fine grits of sandpaper can be purchased at an auto supply store in the painting section.

Have fun with your new toys.
-Dan

Messages In This Thread

Taking baby steps
Patsy -- 10/31/2001, 9:18 am
X-mas crafts: Cedar potpurri and sachets
Paul G. Jacobson -- 10/31/2001, 2:34 pm
Re: X-mas crafts: Cedar potpurri and sachets
Patsy -- 10/31/2001, 3:03 pm
Re: Alternatives to kits....
John B. -- 10/31/2001, 5:54 pm
Re: Alternatives to kits....
Jon Limebrook -- 11/1/2001, 7:21 pm
Re: Maybe, maybe not.....
John B. -- 11/1/2001, 8:43 pm
Re: Laminating plywood
John B. -- 11/2/2001, 6:50 pm
Re: Maybe, maybe not.....
Jon Limebrook -- 11/1/2001, 11:51 pm
Re: Epoxy and strength
Jim Kozel -- 11/2/2001, 10:20 am
Re: Epoxy and strength
Sam McFadden -- 11/2/2001, 2:05 pm
Re: Epoxy additives for fillets question
John B. -- 11/2/2001, 7:13 pm
Re: Epoxy additives for fillets question
Sam McFadden -- 11/2/2001, 7:48 pm
2 gals seems a bit high
Charlie Jones -- 11/1/2001, 11:48 pm
yeah,but you know what you're doing! : ) *NM*
Jon Limebrook -- 11/2/2001, 12:13 am
Doorskin?
Patsy -- 11/1/2001, 8:27 am
Re: Doorskin?
John B. -- 11/1/2001, 6:22 pm
Re: Doorskin?
Rehd -- 11/1/2001, 7:07 pm
Re: Doorskin?
Rehd -- 11/1/2001, 10:18 am
Re: Alternatives to kits....oops
John B. -- 10/31/2001, 6:02 pm
Re: Alternatives to kits...more basic questions
Javier G. Blanco -- 11/1/2001, 9:01 am
Re: Alternatives to kits...more basic questions
Dan Ruff -- 11/1/2001, 10:22 am
kits vs plans and tool requirements *Pic*
Paul G. Jacobson -- 10/31/2001, 5:51 pm
Kits vs plans - Merganser
Patsy -- 11/1/2001, 8:26 am
"maybe a better plane" - OBOY- I said that once
Charlie Jones -- 11/1/2001, 11:37 pm
Re: "maybe a better plane" - OBOY- I said that onc
Patsy -- 11/2/2001, 8:26 am
Re: X-mas crafts: Cedar potpurri and sachets
Don Beale -- 10/31/2001, 4:38 pm
Re: X-mas crafts: Cedar potpurri and sachets
Patsy -- 11/1/2001, 8:31 am
This is a drawknife *Pic*
Dan Ruff -- 11/1/2001, 9:19 am
Re: This is a drawknife
Patsy -- 11/1/2001, 3:34 pm
a couple?
Dan Ruff -- 11/1/2001, 5:00 pm
Re: a couple?
Patsy -- 11/2/2001, 8:21 am
Sources
Greg Stamer -- 11/6/2001, 4:35 pm
Re: Sources
Patsy -- 11/7/2001, 9:38 am
Re: Taking baby steps
Ben Staley -- 10/31/2001, 12:47 pm
Re: You know youre tired when...
Don Beale -- 10/31/2001, 2:27 pm
Re: You know youre tired when...
Jim Horlacher -- 10/31/2001, 3:00 pm
Re: You know youre tired when...
Patsy -- 10/31/2001, 2:55 pm
Re: Taking baby steps
Brian Nystrom -- 10/31/2001, 12:37 pm
Re: Taking baby steps
Patsy -- 10/31/2001, 2:52 pm
Re: Taking baby steps
Brian Nystrom -- 10/31/2001, 4:06 pm