Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Other: Soft Padeyes
By:Paul G. Jacobson
Date: 12/11/2007, 3:14 pm
In Response To: Re: Other: Soft Padeyes (Michael McCluskey)

: I have a couple of pieces of aluminum on the tips of the wooden screw clamp I
: am using. I also scored a couple of lines to see if that would create an
: obstacle that would shape the puddle. If I had a mill, I would mill out a
: little pocket to create a mold...

You don't need a mill. The aluminum is soft. Use a triangular file to notch or bevel the end of one piece of aluminum. Maybe make the bevel 1/8th inch deep, and work into the metal only about 1/16" over the width of the webbing. Then make a matching notch on the other piece. Shouldn't take more than 5 minutes. When they are brought together you'll have a little pocket, about 1/8' deep and 1/8' wide that the soft plastic can flow into.

PGJ

Messages In This Thread

Other: Soft Padeyes
Michael McCluskey -- 12/9/2007, 5:17 pm
Re: Other: Soft Padeyes *Pic*
John Monroe -- 12/11/2007, 5:25 am
Re: Other: Soft Padeyes
Michael McCluskey -- 12/13/2007, 9:47 pm
Re: Other: Soft Padeyes
John Monroe -- 12/14/2007, 2:41 am
Re: Other: Soft Padeyes
Bill Hamm -- 12/15/2007, 10:03 am
Re: Other: Soft Padeyes
TOM RAYMOND -- 12/15/2007, 12:35 pm
Re: Other: Soft Padeyes
Bill Hamm -- 12/16/2007, 1:57 am
Re: Other: Soft Padeyes *Pic*
John Monroe -- 12/16/2007, 2:38 am
Re: Other: Soft Padeyes
Bill Hamm -- 12/17/2007, 2:04 am
Re: Other: Soft Padeyes
TOM RAYMOND -- 12/17/2007, 1:36 pm
Re: Other: Soft Padeyes
Bill Hamm -- 12/18/2007, 2:28 am
Thats a different tune
TOM RAYMOND -- 12/18/2007, 1:56 pm
Re: Thats a different tune
Bill Hamm -- 12/19/2007, 1:27 am
Re: Other: Soft Padeyes *NM*
John Monroe -- 12/17/2007, 3:54 am
Re: Other: Soft Padeyes
Dave Houser -- 12/10/2007, 8:29 pm
Re: Other: Soft Padeyes
Kim Hoover -- 12/10/2007, 12:26 am
Re: Other: Soft Padeyes
Michael McCluskey -- 12/10/2007, 6:42 pm
Re: Other: Soft Padeyes
Paul G. Jacobson -- 12/11/2007, 3:14 pm
Re: Other: Soft Padeyes *LINK*
Michael McCluskey -- 12/13/2007, 12:31 am
Actually, you should thank Joe Greeley
Paul G. Jacobson -- 12/13/2007, 6:32 pm
Very nice!!!!!!!!! *NM*
Glen Smith -- 12/13/2007, 12:51 am
Re: Other: Soft Padeyes
Bob Deutsch -- 12/9/2007, 5:55 pm
Re: Other: Soft Padeyes
Michael McCluskey -- 12/9/2007, 8:05 pm
Re: Other: Soft Padeyes *LINK*
Bob Deutsch -- 12/9/2007, 9:12 pm
Re: Other: Soft Padeyes
Michael McCluskey -- 12/9/2007, 9:28 pm
Re: Other: Soft Padeyes
Bob Deutsch------WebKitFormBoundaryMj+41hHLCDocqqN -- 12/10/2007, 7:33 am
Re: Other: Soft Padeyes
Bill Hamm -- 12/12/2007, 1:51 am
Re: Other: Soft Padeyes
Glen Smith -- 12/9/2007, 5:37 pm