Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: Coaming Bubble Trouble
By:Dan Caouette (CSFW)
Date: 9/18/2007, 7:25 am
In Response To: Re: Epoxy: Coaming Bubble Trouble (Hyok)

: Another trick I picked up from R/C glider builders is to use spray adhesive,
: such as 3M 77, to apply the glass, prior to applying epoxy. I find that
: spraying the glass first, then applying it like tape, works well. You can
: spray the coaming first instead, but you'd have to clean up the overspray
: afterwards.

Neat trick about using 3M 77. I may have to try that! Thanks.

Dan

Messages In This Thread

Epoxy: Coaming Bubble Trouble
Ken F -- 9/17/2007, 9:42 pm
Re: Epoxy: Coaming Bubble Trouble
Hyok -- 9/18/2007, 1:35 am
Re: Epoxy: Coaming Bubble Trouble
Mike Braun -- 9/18/2007, 2:47 pm
Re: Epoxy: Coaming Bubble Trouble
Hyok -- 9/18/2007, 3:14 pm
Re: Epoxy: Coaming Bubble Trouble
Bill Hamm -- 9/18/2007, 10:03 am
Re: Epoxy: Coaming Bubble Trouble
Dave Reekie -- 9/18/2007, 12:48 pm
Re: Epoxy: Coaming Bubble Trouble
Bill Hamm -- 9/18/2007, 6:13 pm
Re: Epoxy: Coaming Bubble Trouble
Hyok -- 9/18/2007, 3:18 pm
Re: Epoxy: Coaming Bubble Trouble
Bill Hamm -- 9/18/2007, 6:14 pm
Re: Epoxy: Coaming Bubble Trouble
Dan Caouette (CSFW) -- 9/18/2007, 7:25 am
Re: Epoxy: Coaming Bubble Trouble
Pedro Almeida -- 9/18/2007, 1:19 am
Re: Epoxy: Coaming Bubble Trouble
Ken F -- 9/18/2007, 6:20 am