Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: Coaming Bubble Trouble
By:Pedro Almeida
Date: 9/18/2007, 1:19 am
In Response To: Epoxy: Coaming Bubble Trouble (Ken F)

Ken,

If the bubbles are only on the outside edge of the coaming, I wouldn't worry about putting more glass in place. As long as the top and bottom of the coaming lip are glassed, it should be strong enough. If that's the case, just fair it in; add some clear epoxy if you have to.

Good luck,

Pedro Almeida

Messages In This Thread

Epoxy: Coaming Bubble Trouble
Ken F -- 9/17/2007, 9:42 pm
Re: Epoxy: Coaming Bubble Trouble
Hyok -- 9/18/2007, 1:35 am
Re: Epoxy: Coaming Bubble Trouble
Mike Braun -- 9/18/2007, 2:47 pm
Re: Epoxy: Coaming Bubble Trouble
Hyok -- 9/18/2007, 3:14 pm
Re: Epoxy: Coaming Bubble Trouble
Bill Hamm -- 9/18/2007, 10:03 am
Re: Epoxy: Coaming Bubble Trouble
Dave Reekie -- 9/18/2007, 12:48 pm
Re: Epoxy: Coaming Bubble Trouble
Bill Hamm -- 9/18/2007, 6:13 pm
Re: Epoxy: Coaming Bubble Trouble
Hyok -- 9/18/2007, 3:18 pm
Re: Epoxy: Coaming Bubble Trouble
Bill Hamm -- 9/18/2007, 6:14 pm
Re: Epoxy: Coaming Bubble Trouble
Dan Caouette (CSFW) -- 9/18/2007, 7:25 am
Re: Epoxy: Coaming Bubble Trouble
Pedro Almeida -- 9/18/2007, 1:19 am
Re: Epoxy: Coaming Bubble Trouble
Ken F -- 9/18/2007, 6:20 am