Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Rather than sanding...
By:Brian Nystrom
Date: 6/28/2001, 3:14 pm
In Response To: Re: glass cloth unravelling (Tom Jablonski)

...use a scraper if you have one. If the epoxy is still a bit soft, sandpaper will clog and possibly smear the epoxy, but a scraper will remove the offending fibers and leave a smooth surface.

Messages In This Thread

glass cloth unravelling
mark stevens -- 6/28/2001, 1:12 pm
Re: glass cloth unravelling
Doug K. -- 6/29/2001, 11:10 am
Re: glass cloth unravelling
mark stevens -- 6/29/2001, 5:33 pm
Re: glass cloth unravelling
Tom Jablonski -- 6/28/2001, 2:07 pm
Re: glass cloth unravelling
mark stevens -- 6/28/2001, 3:15 pm
Rather than sanding...
Brian Nystrom -- 6/28/2001, 3:14 pm
Re: Rather than sanding...
Jim Pace -- 6/28/2001, 5:41 pm
Re: Rather than sanding...
Roy Morford -- 6/28/2001, 7:30 pm
Re: Rather than sanding...
Jim Pace -- 6/28/2001, 11:36 pm
Re: Rather than sanding...
Roy Morford -- 6/29/2001, 11:05 am
Re: Rather than sanding...
Rob Macks -- 6/28/2001, 10:26 pm
Re: Rather than sanding...
Rob Macks -- 6/28/2001, 4:32 pm