Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Another poor-man's roof rack
By:Mike Nicholson
Date: 6/26/2001, 11:10 am
In Response To: A poor-man's roof rack (Mark)

Nice Idea Mark.
When I cut my bulkheads from 3" foam, they left a piece of scrap that matched the hull in about the two right places. I sawed the bottoms flat and ripped a groove to fit my mini-van roof racks. (The table saw left a nice finish. I had to be careful with the feed so it didn't grab.)
If you already have the foam, its another cheap solution.
Mike

Messages In This Thread

A poor-man's roof rack
Mark -- 6/26/2001, 10:21 am
Re: foam pipe insulation works well, too *NM*
Ross Sieber -- 6/26/2001, 2:25 pm
great minds think alike...
Jim Eisenmenger -- 6/26/2001, 2:17 pm
Re: If you can build a boat, you can build a rack!
Tony -- 6/26/2001, 11:47 am
Re: If you can build a boat, you can build a rack! *Pic*
Bill Boyd -- 6/26/2001, 3:21 pm
Re: See if this link works *Pic*
Shawn Baker -- 6/26/2001, 4:54 pm
Re:Thanks Shawn ..MS Browser VooDoo (O.T.)
Bill Boyd -- 6/26/2001, 7:48 pm
Re: If you can build a boat, you can build a rack!
Mark -- 6/26/2001, 12:50 pm
Another poor-man's roof rack
Mike Nicholson -- 6/26/2001, 11:10 am
Re: And a mod to that...
Don Beale -- 6/27/2001, 10:46 am