Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Material for forms
By:Rehd
Date: 4/23/2001, 2:44 pm
In Response To: Re: Material for forms (Jim)

: 3/4 inch AC plywood makes really good forms
3/4 plywood is pretty expensive.

Actually, most cabinet shops throw away pieces of 3/4" plywood that are smaller than 16" x 24" as it is not of use to them in any cabinet use. They usually toss it in a bin or dumpster as waste. You could go to some and see if they have anything like that and just snag it and build your forms ( free ). My Great Auk forms will be made of some of the best Oak 3/4" plywood you've seen. :) Just watch out for the newer stuff that has the particle-board core. Hope that helps!

Rehd

Messages In This Thread

Material for forms
Mike Boren -- 4/23/2001, 12:15 pm
Re: Material for forms
Rick Brannan -- 4/24/2001, 12:57 am
Re: Material for forms
Arthur -- 4/23/2001, 2:00 pm
Re: Material for forms
Rehd -- 4/23/2001, 1:48 pm
Re: Material for forms
Jim -- 4/23/2001, 2:21 pm
Re: Material for forms
Rehd -- 4/23/2001, 2:44 pm
Re: Material for forms
Mike Boren -- 4/23/2001, 2:51 pm
Re: Material for forms
Mike Boren -- 4/23/2001, 3:20 pm
Re: Material for forms
Rehd -- 4/23/2001, 7:11 pm
Re: Material for forms
Mike Boren -- 4/25/2001, 11:37 am
Re: Material for forms
Jim -- 4/23/2001, 3:43 pm
Re: Material for forms
Rehd -- 4/23/2001, 3:13 pm