Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Over-oiling
By:Rob Macks
Date: 2/19/2001, 7:08 pm
In Response To: Re: Over-oiling (Jay Babina)

: The weight I'm refering to occured before it ever entered the water. The
: paddle tips are epoxy coated. If 5 oz.of thinner and oil dissappear, I
: assume it's in the paddle. I would imagine the oil would repel the water
: which is why you would do it in the first place. I know a few people who
: use Thompson's water seal or a similar product. I know Thompsons contains
: wax - which makes wood bead up.

Thompson’s water seal also contains some serious carcinogens. I used to have to dip window parts in Thompson’s for a shop I worked for. It's nasty stuff. I would not want to be handling a paddle coated in Thompson’s.

On the other hand, yours hands may be preserved for eternity.

Rob

Messages In This Thread

Greenland paddle weights (was hollow core)
Greg Stamer -- 2/17/2001, 11:21 pm
Re: Greenland paddle weights (was hollow core)
Kent LeBoutillier -- 2/21/2001, 6:12 am
Re: Greenland paddle weights (was hollow core)
Greg Stamer -- 2/21/2001, 12:37 pm
paddle weights - hollow core - oil
risto -- 2/21/2001, 1:18 pm
Re: paddle weights - hollow core - oil
Dave Braun -- 2/22/2001, 9:21 am
Re: paddle weights - hollow core - oil
risto -- 2/22/2001, 10:40 am
Re: paddle weights - hollow core - oil
Greg Stamer -- 2/21/2001, 5:10 pm
Re: paddle weights - hollow core - oil
Tom -- 2/21/2001, 5:46 pm
Over-oiling
Jay Babina -- 2/19/2001, 9:09 am
Oiled paddle VS Epoxy
Jay Babina -- 2/20/2001, 9:21 am
Re: Oiled paddle VS Epoxy
Greg Stamer -- 2/20/2001, 10:49 am
Re: Over-oiling
Nick Schade - Guillemot Kayaks -- 2/19/2001, 10:16 am
Re: Over-oiling
Jay Babina -- 2/19/2001, 4:17 pm
Re: Over-oiling
Rob Macks -- 2/19/2001, 7:08 pm
What about a paraffin finish
Paul G. Jacobson -- 2/19/2001, 11:46 pm
Re: What about a paraffin finish
Greg Stamer -- 2/22/2001, 6:51 pm
Re: Greenland paddle weights (was hollow core)
Tom -- 2/18/2001, 11:37 pm