Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Goo gone
By:Don Beale
Date: 7/29/2000, 3:28 pm

I made the mistake of using fiber reinforced packing tape to hold the hull-deck joint while I taped it. Next time I'll use the plastic pallet ties with the metal clips. I just finished scrubbing every square inch with Simple Green, which I hope got all the tape residue. I recall a thread about Goo-Gone, but couldnt find it. If there is a small spot or two that I missed, will the epoxy break it down on the final coats? Or will it go over it? Or perhaps not go off due to the contaminate?

Messages In This Thread

Goo gone
Don Beale -- 7/29/2000, 3:28 pm
Tape? Don't need much stinkin' tape! *Pic*
Jerry Siegel -- 7/30/2000, 1:32 pm
Here's the pic *Pic*
Jerry Siegel -- 7/30/2000, 1:35 pm
Re: No It's Not!
Spidey -- 7/30/2000, 1:49 pm
One more try *Pic*
Jerry Siegel -- 7/30/2000, 1:45 pm
Another view *Pic*
Jerry Siegel -- 7/30/2000, 1:48 pm
Re: Another view
Tony -- 7/31/2000, 1:29 pm
Re: Goo gone
Dean Trexel -- 7/29/2000, 4:21 pm
Re: Goo gone
Don Beale -- 7/30/2000, 10:12 am
Re: Goo gone
Tig and Tink -- 7/29/2000, 8:53 pm
Re: Goo gone
Dean Trexel -- 7/29/2000, 9:00 pm
Re: Goo gone
Tig and Tink -- 7/29/2000, 9:22 pm
Re: Goo gone
Rehd -- 7/30/2000, 12:40 am
Re: Goo gone
Tig and Tink -- 7/30/2000, 1:44 am
Re: Goo gone
Dean Trexel -- 7/29/2000, 10:43 pm
Re: Solvent Wipes
Dave Houser -- 7/30/2000, 12:28 am
Re: Goo gone
Ken Sutherland -- 7/29/2000, 10:03 pm