Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Going with 2-part poly clear
By:Rick Thomas
Date: 5/14/2000, 12:43 pm
In Response To: Re: Going with 2-part poly clear (Rehd)

: Well Folks, there you have it. He's used it once and he's going in again,
: without a helmet. Is he hooked to what?? I'll send him a bib.

: Actually Dean, I think Ian's thing is "TOTAL AWARENESS", 'cause
: there are those who always have to push the envelope as far as they can,
: and will take the unnessary(?) risks just to show they can do it, and
: there are those that don't read labels at all, just open, pour and spray.

: The local Harley shop that does our bikes and clear-coats them has a I vote for the poly and think its the greatest .but most Body shops will charge about 250 to spray it you can leave it and let the chemicals fly and they will also buff it out ....pluse the suite and resporator will cost that.
: ventilation system, and they wear good respirators and, as much as can be
: expected of Bikers, they are all doing fine. But, they aren't stupid. They
: are AWARE and they DO take the precautions.

: I really like the idea of the clear-coat 2 part Poly's as they are absolutely
: gorgeous. Make sure you don't have even the smallest flaw on your boat,
: cause the clear-coat WILL make it stick out like a sore thumb.

: Good Luck and hope to see it when You're done. Hey, why does Ian get your
: boat??

: Rehd :)

Messages In This Thread

Going with 2-part poly clear
Dean Trexel -- 5/11/2000, 6:50 pm
It was nice knowing you........ R.I.P.
Doug K -- 5/11/2000, 8:02 pm
Re: It was nice knowing you........ R.I.P.
Dean Trexel -- 5/11/2000, 9:48 pm
Re: It was nice knowing you........ R.I.P.
Marty Hangarter -- 5/12/2000, 8:32 am
Re: moisture-cure urethanes
Dean Trexel -- 5/12/2000, 4:40 pm
Re: Going with 2-part poly clear
Rehd -- 5/11/2000, 7:29 pm
Re: Going with 2-part poly clear
Rick Thomas -- 5/14/2000, 12:43 pm
Re: Going with 2-part poly clear
Dean Trexel -- 5/11/2000, 7:40 pm
Re: Going with 2-part poly clear
Ian Johnston -- 5/12/2000, 4:36 am
Re: Going with 2-part poly clear
Don -- 5/12/2000, 5:06 pm
Re: Going with 2-part poly clear
Ian Johnston -- 5/12/2000, 8:47 pm
Re: Going with 2-part poly clear
Rehd -- 5/11/2000, 8:41 pm
Re: Going with 2-part poly clear
Ian Johnston -- 5/12/2000, 4:25 am
Re: Going with 2-part poly clear
Rehd -- 5/12/2000, 12:21 pm