Hello all,

It seems like our Osprey has been "almost done" for weeks. :-) However, it is now time to drill through the end pours so that we can attach carry toggles. We need to drill 3/4" holes at the bow and stern. We have a standard hand drill. Should we use a bit or hole saw? Any hints on setting up a guide to ensure that the hole is straight, etc.? Do most people just mark the spot and drill it free hand? We have at our disposal sufficient scrap wood and lots of clamps. :-)

Why a 3/4" hole, you may ask?

I was considering methods to secure our boats when they were hanging in our carport. We'd had bikes stolen from there and wanted to ensure the security of our boats. My idea was to hang the boat from the holes through the end pours. At the stern, the carry toggle rope loop would be hung on a hook. And at the bow, I'd remove the rope from the the hole and hang it using a U-Lock through the end pour (the U-Lock shackle is about 5/8"). Is there any problem with supporting the weight of the boat from the ends?

Thanks alot,

Tim.