Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Sanding-Before-Epoxy Survey
By:Spidey
Date: 3/30/2000, 2:29 pm
In Response To: Re: Sanding-Before-Epoxy Survey (Edgar Kleindinst)

Hi Edgar;

I'll have a lot more experience after I've glassed some of the boat. After hearing the diversity of opinions, I think I am going to experiment a bit when I get to the inside of the hull, at least as far as appearance goes. Most of it will remain unseen, so I'll play around with different levels of finish and see what actually happens.

The Disks that seem to leave a lot of fuzz (for me) were the "Ace" brand, as in Ace Hardware. I liked the Norton brand from Home Depot. They both cut fast and both last quite a while, but the Norton disks left a nicer finish.

Thanks for your help, Spidey

Messages In This Thread

Sanding-Before-Epoxy Survey
Spidey -- 3/29/2000, 10:37 pm
Re: Sanding-Before-Epoxy Survey
Edgar Kleindinst -- 3/30/2000, 11:18 am
Re: Sanding-Before-Epoxy Survey
Spidey -- 3/30/2000, 2:29 pm
Re: Sanding-Before-Epoxy Survey
Jay Babina -- 3/30/2000, 10:14 am
Re: Sanding-Before-Epoxy Survey
Spidey -- 3/30/2000, 2:11 pm
Re: the 2/3/3 method.
Todd -- 3/30/2000, 10:14 am
Re: the 2/3/3 method.
Spidey -- 3/30/2000, 1:57 pm
Re: the 2/3/3 method.
Doug K -- 3/30/2000, 3:11 pm
Re: Sanding-Before-Epoxy Survey
John Michne -- 3/30/2000, 7:22 am
Re: Sanding-Before-Epoxy Survey
Spidey -- 3/30/2000, 1:55 pm
Re: Sanding-Before-Epoxy Survey
Gary Toffelmire -- 3/30/2000, 9:20 am
Re: Sanding-Before-Epoxy Survey
Paul G. Jacobson -- 3/29/2000, 11:04 pm
Re: Sanding-Before-Epoxy Survey
Ross Leidy -- 3/30/2000, 9:30 pm
Re: Sanding-Before-Epoxy Survey
Spidey -- 3/30/2000, 1:39 am
Re: Sanding-Before-Epoxy Survey
Tony -- 3/30/2000, 8:32 pm
Re: Sanding-Before-Epoxy Survey
Julie Kanarr -- 3/29/2000, 11:39 pm
Re: Sanding Addiction at the next level
Dave Houser -- 3/30/2000, 1:03 am
Re: Sanding Addiction at the next level
Spidey -- 3/30/2000, 1:49 am