> Scotty, I didn't have trouble with the bristles. With MAS epoxy the
> viscosity is so low that it just flowed into the weave after I ran over it
> with the roller. I also used a squeege it worked ok but the roller made a
> more even coat for me. I wish MAS had a thickener that is clear, there
> stuff is a little runny for fill coats.

I used a squegee on the first two coats the first was fine I took some back off. The second I think I flowed on too thick and left it. How do I handle it now? Sand It? (what grit) there are some dry spots still where the weave is still exposed. Do I run the risk of sanding into the weave or what? Thanks again TB