> I've looked at several possibilities and the one I'mm going to try next is
> Interlux's 2 part polyurethane clear. I was speaking to a manager at the
> West Marine Store in Portland, ME and he was saying that he and his wife
> had just finished repqinting the hull of their sailboat using the dark
> blue with the clear over it. They said by following the directions the
> brushing went quite well and the job looked like it had been sprayed. I
> figured since I had spent so much time prepping my Chesepeake 18 hull for
> painting and the stuff is coming off by looking at it the extra fuss of
> the 2 part can't be any worse. I'd be interested to see if anyoone has
> tried this paint nad what success they've had (or not had).

If you do it, I'd certiantly like to know how using the 2 part polyurethane clear turns out.

Bobby