Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Hatchless Bulkheads
By:CHad
Date: 4/22/1999, 2:07 pm
In Response To: Re: Hatchless Bulkheads (Marty)

> I like this hidden hatch idea a lot except I think it would limit the size
> of the hatch opening on most kayaks to maybe only 4 inches high or so. I
> assume you are only referring to the rear of the kayak as you would never
> be able to reach the forward bulkhead through the cockpit. It sounds like
> it could work fine in the rear if you packed all your gear in flat wide
> packages and slid them in and out.

I installed a 8" inspection plate in the rear bulkhead of my CLC. It works well. I have yet to try to stuff full camping gear in there, but it is at least as big as the hatches on the British boats. The best part is, you have those full uninterrupted decks for friends to drool over.

CHad

Messages In This Thread

Hatchless Bulkheads
Ray Jenkins -- 4/20/1999, 1:04 am
Re: Hatchless Bulkheads
eric schade (shearwater-boats) -- 4/22/1999, 1:29 pm
Re: Hatchless Bulkheads
Paul Jacobson -- 4/22/1999, 3:45 am
Re: Hatchless Bulkheads
Marty -- 4/22/1999, 12:06 pm
Re: Hatchless Bulkheads
Paul Jacobson -- 4/22/1999, 9:43 pm
Re: Hatchless Bulkheads
CHad -- 4/22/1999, 2:07 pm
Re: Hatchless Bulkheads
lee -- 4/21/1999, 11:02 am
p.s. Hatchless Bulkheads
lee -- 4/21/1999, 11:05 am
Re: Hatchless Bulkheads
Nick Schade - Guillemot Kayaks -- 4/21/1999, 8:46 am
Re: Hatchless Bulkheads
Mike Scarborough -- 4/20/1999, 12:47 pm
Re: Hatchless Bulkheads
Paul Woolson -- 4/20/1999, 8:14 pm