Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: exposing the weave
By:Bill Hamm
Date: 1/6/2015, 9:48 am
In Response To: Strip: exposing the weave (Howie)

Any white spots left in the epoxy will show somewhat. Perhaps it won't be white, but you can see it. Like ET says, you really don't want to sand into any glass.

Getting your first stripper at the design weight very likely won't happen, it's too easy to add weight.

Bill H.

Messages In This Thread

Strip: exposing the weave
Howie -- 1/5/2015, 6:43 pm
Re: Strip: exposing the weave
Etienne Muller -- 1/6/2015, 4:22 am
Re: Strip: exposing the weave
Bill Hamm -- 1/6/2015, 9:48 am
Re: Strip: exposing the weave
Howie -- 1/6/2015, 6:37 pm
Re: Strip: exposing the weave
Bill Hamm -- 1/7/2015, 1:07 am
Re: Strip: exposing the weave
Jay Babina -- 1/7/2015, 9:08 am
Re: Strip: exposing the weave
Howie -- 1/7/2015, 6:24 pm
Re: Strip: exposing the weave
Bill Hamm -- 1/8/2015, 2:24 am
Re: Strip: exposing the weave
Marc Upchurch -- 1/8/2015, 7:40 am
Re: Strip: exposing the weave
Rob Macks/Laughing Loon CC&K -- 1/8/2015, 1:24 pm
Re: Strip: exposing the weave
Howie -- 1/8/2015, 5:30 pm
Re: Strip: exposing the weave
Mike Bielski -- 1/9/2015, 4:05 pm
Re: Strip: exposing the weave
Howie -- 1/9/2015, 6:05 pm