Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: exposing the weave
By:Howie
Date: 1/6/2015, 6:37 pm
In Response To: Re: Strip: exposing the weave (Bill Hamm)

ET and Bill, thanks for the advice. What I'm hearing is if this was not the only issue that brought the ten foot rule into the conversation then varnish it and take it for a paddle. If I insist on trying for perfection add another coating or two of epoxy, then sand again before opening the varnish.

Messages In This Thread

Strip: exposing the weave
Howie -- 1/5/2015, 6:43 pm
Re: Strip: exposing the weave
Etienne Muller -- 1/6/2015, 4:22 am
Re: Strip: exposing the weave
Bill Hamm -- 1/6/2015, 9:48 am
Re: Strip: exposing the weave
Howie -- 1/6/2015, 6:37 pm
Re: Strip: exposing the weave
Bill Hamm -- 1/7/2015, 1:07 am
Re: Strip: exposing the weave
Jay Babina -- 1/7/2015, 9:08 am
Re: Strip: exposing the weave
Howie -- 1/7/2015, 6:24 pm
Re: Strip: exposing the weave
Bill Hamm -- 1/8/2015, 2:24 am
Re: Strip: exposing the weave
Marc Upchurch -- 1/8/2015, 7:40 am
Re: Strip: exposing the weave
Rob Macks/Laughing Loon CC&K -- 1/8/2015, 1:24 pm
Re: Strip: exposing the weave
Howie -- 1/8/2015, 5:30 pm
Re: Strip: exposing the weave
Mike Bielski -- 1/9/2015, 4:05 pm
Re: Strip: exposing the weave
Howie -- 1/9/2015, 6:05 pm