Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: making Wood strips
By:Darren.edwards
Date: 7/21/2014, 8:17 pm
In Response To: Re: Strip: making Wood strips (ancient kayaker)

Hi all

Just had a good look at the posts in question. Two things were apparant, the first was that there would be a lot of waste due to knots, and that is just what is visible now. But for essentially scrap wood anyway not a biggy. What was more of a bother is that there are holes from carriage bolts
Running through them at a few points along the same plane. I could just remove that entire slab, basically 1/2 inch down the center and salvage what I can from that for smaller areas. Grain matching would a hassle I think and may lead to painting. Should anything less than 4 ft for example not be bothered with for building. I am beggining to think it is not worth the effort and should just purchase them, or at least the board stock.

Messages In This Thread

Strip: making Wood strips
Darren Edwards -- 7/13/2014, 8:52 am
Re: Strip: making Wood strips
ancient kayaker -- 7/13/2014, 10:05 am
Re: Strip: making Wood strips
Kurt Maurer -- 7/13/2014, 10:58 am
Re: Strip: making Wood strips
Marc Upchurch -- 7/13/2014, 10:36 am
Re: Strip: making Wood strips
JohnAbercrombie -- 7/13/2014, 11:24 am
Re: Strip: making Wood strips
JohnAbercrombie -- 7/13/2014, 1:57 pm
Re: Strip: making Wood strips *PIC*
ancient kayaker -- 7/13/2014, 2:29 pm
Re: Strip: making Wood strips
Don T. -- 7/13/2014, 9:31 pm
Re: Strip: making Wood strips *PIC*
ancient kayaker -- 7/14/2014, 12:50 pm
Re: Strip: making Wood strips
Jay Babina -- 7/14/2014, 7:55 am
Re: Strip: making Wood strips
JohnAbercrombie -- 7/14/2014, 11:48 am
Re: Strip: making Wood strips
Jay Babina -- 7/15/2014, 6:45 am
Re: Strip: making Wood strips
Darren edwards -- 7/14/2014, 10:44 am
Re: Strip: making Wood strips
Marc Upchurch -- 7/14/2014, 7:21 pm
Re: Strip: making Wood strips
Mike Bielski -- 7/14/2014, 11:35 pm
Re: Strip: making Wood strips
Mike Bielski -- 7/14/2014, 11:40 pm
Re: Strip: making Wood strips
Bill Hamm -- 7/15/2014, 12:32 am
Re: Strip: making Wood strips
Mike Bielski -- 7/15/2014, 12:46 am
Re: Strip: making Wood strips
Bill Hamm -- 7/15/2014, 3:46 am
Re: Strip: making Wood strips
Etienne Muller -- 7/15/2014, 5:57 am
Re: Strip: making Wood strips
JohnAbercrombie -- 7/15/2014, 12:43 pm
Re: Strip: making Wood strips
Bill Hamm -- 7/16/2014, 2:12 am
Re: Strip: making Wood strips
ancient kayaker -- 7/15/2014, 7:51 am
Re: Strip: making Wood strips
Bill Hamm -- 7/16/2014, 2:14 am
Re: Strip: making Wood strips
ancient kayaker -- 7/16/2014, 7:53 am
Re: Strip: making Wood strips
Bill Hamm -- 7/20/2014, 1:01 am
Re: Strip: making Wood strips
Darren.edwards -- 7/21/2014, 8:17 pm
Re: Strip: making Wood strips
JohnAbercrombie -- 7/21/2014, 9:50 pm
Re: Strip: making Wood strips
ancient kayaker -- 7/21/2014, 9:51 pm
Re: Strip: making Wood strips
Bill Hamm -- 7/22/2014, 12:22 am
Re: Strip: making Wood strips
ancient kayaker -- 7/22/2014, 10:17 am