Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: making Wood strips
By:JohnAbercrombie
Date: 7/13/2014, 11:24 am
In Response To: Strip: making Wood strips (Darren Edwards)

Will my table saw be good enough to rip the posts into planks and the planks into strips.

Yes, your table saw (with a new blade like a 7 1/4 Diablo (cheap) for ripping strips) will be good enough in terms of power and runout (even a sloppy saw will cut quite straight with a new or quality blade in dry cedar, IME), but IMO it will need at minimum a temporary oufeed table long enough to support the strips and planks as they exit the saw - a better setup has infeed and outfeed tables. Trying to rip strips (anything longer than a couple of feet, really) on a tablesaw without outfeed support is an accident waiting to happen, IMO. Outfeed support is easy to rig up with a sheet of plywood ripped into 2'x8' strips and a bunch of 2x2 and 2x4s.
I never had any luck with those roller stands, BTW.
You should also make a zero clearance insert for the table -to make sure the blade can't pull the strip end below the table .
Searching around will find you info on arranging the ripping fence and hold-downs/featherboards for ripping strips.

Messages In This Thread

Strip: making Wood strips
Darren Edwards -- 7/13/2014, 8:52 am
Re: Strip: making Wood strips
ancient kayaker -- 7/13/2014, 10:05 am
Re: Strip: making Wood strips
Kurt Maurer -- 7/13/2014, 10:58 am
Re: Strip: making Wood strips
Marc Upchurch -- 7/13/2014, 10:36 am
Re: Strip: making Wood strips
JohnAbercrombie -- 7/13/2014, 11:24 am
Re: Strip: making Wood strips
JohnAbercrombie -- 7/13/2014, 1:57 pm
Re: Strip: making Wood strips *PIC*
ancient kayaker -- 7/13/2014, 2:29 pm
Re: Strip: making Wood strips
Don T. -- 7/13/2014, 9:31 pm
Re: Strip: making Wood strips *PIC*
ancient kayaker -- 7/14/2014, 12:50 pm
Re: Strip: making Wood strips
Jay Babina -- 7/14/2014, 7:55 am
Re: Strip: making Wood strips
JohnAbercrombie -- 7/14/2014, 11:48 am
Re: Strip: making Wood strips
Jay Babina -- 7/15/2014, 6:45 am
Re: Strip: making Wood strips
Darren edwards -- 7/14/2014, 10:44 am
Re: Strip: making Wood strips
Marc Upchurch -- 7/14/2014, 7:21 pm
Re: Strip: making Wood strips
Mike Bielski -- 7/14/2014, 11:35 pm
Re: Strip: making Wood strips
Mike Bielski -- 7/14/2014, 11:40 pm
Re: Strip: making Wood strips
Bill Hamm -- 7/15/2014, 12:32 am
Re: Strip: making Wood strips
Mike Bielski -- 7/15/2014, 12:46 am
Re: Strip: making Wood strips
Bill Hamm -- 7/15/2014, 3:46 am
Re: Strip: making Wood strips
Etienne Muller -- 7/15/2014, 5:57 am
Re: Strip: making Wood strips
JohnAbercrombie -- 7/15/2014, 12:43 pm
Re: Strip: making Wood strips
Bill Hamm -- 7/16/2014, 2:12 am
Re: Strip: making Wood strips
ancient kayaker -- 7/15/2014, 7:51 am
Re: Strip: making Wood strips
Bill Hamm -- 7/16/2014, 2:14 am
Re: Strip: making Wood strips
ancient kayaker -- 7/16/2014, 7:53 am
Re: Strip: making Wood strips
Bill Hamm -- 7/20/2014, 1:01 am
Re: Strip: making Wood strips
Darren.edwards -- 7/21/2014, 8:17 pm
Re: Strip: making Wood strips
JohnAbercrombie -- 7/21/2014, 9:50 pm
Re: Strip: making Wood strips
ancient kayaker -- 7/21/2014, 9:51 pm
Re: Strip: making Wood strips
Bill Hamm -- 7/22/2014, 12:22 am
Re: Strip: making Wood strips
ancient kayaker -- 7/22/2014, 10:17 am