Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Non Cove and Bead question
By:scottbaxter
Date: 12/31/2013, 3:51 pm
In Response To: Strip: Non Cove and Bead question (Richard P)

Depends on the boat but I think 3% is a good starting point. I cut the bevel for the least amount of curvature and use a block plane to tune the rest of the strip. 2%-5% seems to be the range of the bevels I cut.

Messages In This Thread

Strip: Non Cove and Bead question
Richard P -- 12/31/2013, 11:11 am
Re: Strip: Non Cove and Bead question
Marc Upchurch -- 12/31/2013, 1:27 pm
Re: Strip: Non Cove and Bead question
Richard P -- 12/31/2013, 2:47 pm
Re: Strip: Non Cove and Bead question
scottbaxter -- 12/31/2013, 3:51 pm
Re: Strip: Non Cove and Bead question
John Messinger -- 1/1/2014, 7:33 am
Re: Strip: Non Cove and Bead question
ddaniels -- 1/1/2014, 4:08 pm
Re: Strip: Non Cove and Bead question
PaulK -- 1/2/2014, 10:10 pm