Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Tools: tandem bead & cove cutting
By:Douglas Lee
Date: 5/26/2012, 12:10 pm
In Response To: Re: Tools: tandem bead & cove cutting (Donovan)

: a k is right, one router has to be mounted up-side down and the
: other one right- side-up so both cutters are turning into the
: stock.
: You keep talking about Porter Cable routers (no micro adjustment).
: I am running two P C/Rockwell model 100s (maybe 40 years old)
: and can adjust them to within a gnat's eyelash. We can put 360
: feet of strips through this fixture in about 20 minutes, once it
: is dialed in.

I bought both routers in 1997 90th year anniversary models. Can't resist a sale. I knew that I would someday need 2 routers. The micro adjust feature is very desirable for raising and lowering the bits in very small increments.
I did not know about those things when I bought them.

Messages In This Thread

Tools: tandem bead & cove cutting
Douglas Lee -- 5/25/2012, 9:04 pm
Re: Tools: tandem bead & cove cutting
ancient kayaker -- 5/25/2012, 11:27 pm
Re: Tools: tandem bead & cove cutting
Douglas Lee -- 5/26/2012, 12:40 am
Re: Tools: tandem bead & cove cutting
ancient kayaker -- 5/25/2012, 11:38 pm
Re: Tools: tandem bead & cove cutting
Donovan -- 5/25/2012, 11:58 pm
Re: Tools: tandem bead & cove cutting
Douglas Lee -- 5/26/2012, 12:48 am
Re: Tools: tandem bead & cove cutting
Bill Hamm -- 5/26/2012, 1:31 am
Re: Tools: tandem bead & cove cutting
Douglas Lee -- 5/26/2012, 9:39 pm
Re: Tools: tandem bead & cove cutting
Donovan -- 5/26/2012, 1:47 pm
Re: Tools: tandem bead & cove cutting
Douglas Lee -- 5/26/2012, 12:10 pm
Re: Tools: tandem bead & cove cutting *PIC*
Etienne Muller -- 5/26/2012, 3:35 am
Re: Tools: tandem bead & cove cutting
Douglas Lee -- 5/26/2012, 9:58 am
Re: Tools: tandem bead & cove cutting *PIC*
Etienne Muller -- 5/27/2012, 2:49 am
Re: Tools: tandem bead & cove cutting
Douglas Lee -- 5/28/2012, 1:43 pm
Re: Tools: tandem bead & cove cutting
scottbaxter -- 5/26/2012, 8:31 am
Re: Tools: tandem bead & cove cutting
Douglas Lee -- 5/26/2012, 10:14 am
Re: Tools: tandem bead & cove cutting
Rod Tait (Orca Boats) -- 5/26/2012, 11:15 am
Re: Tools: tandem bead & cove cutting
Douglas Lee -- 5/26/2012, 11:53 am
Re: Tools: tandem bead & cove cutting *PIC*
Don T -- 5/26/2012, 4:29 pm
Re: Tools: tandem bead & cove cutting
Douglas Lee -- 5/26/2012, 9:20 pm
Re: Tools: tandem bead & cove cutting
Randy Echtinaw -- 5/29/2012, 9:18 pm
Re: Tools: tandem bead & cove cutting
Etienne Muller -- 5/30/2012, 6:42 am
Re: Tools: tandem bead & cove cutting
Douglas Lee -- 5/30/2012, 3:35 pm
Re: Tools: tandem bead & cove cutting
ancient kayaker -- 5/30/2012, 5:33 pm
Re: Tools: tandem bead & cove cutting
Etienne Muller -- 5/30/2012, 6:11 pm
Re: Tools: tandem bead & cove cutting
Douglas Lee -- 5/30/2012, 11:45 pm
Re: Tools: tandem bead & cove cutting
Dan Caouette -- 5/30/2012, 10:06 pm